Bedienungsanleitung Panasonic EY4542 (Seite 8 von 212) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

502392

Zoom out

Zoom in

Vorherige Seite

1/212

Nächste Seite

9) The risk of kickback increases as the bat-

tery pack discharges.

10) Be sure to inspect material. Avoid cutting

other different material.

11) Be careful not to drop the tool.

12) Never swing the tool.

13) Never cover the ventilation slots, and keep

them free from dust or other material.

14) Do not clamp the tool in a vise. Never cut

with the tool held upside down in a vise.

This is extremely dangerous and can lead

to serious accidents.

15) Never wear knitted gloves.

16) Be sure no one is below when using the

tool in high locations.

17) Do not touch the blade immediately after

operation. It may be hot and could burn

your skin.

18) Do not touch material after it has been cut.

Cut material may be very hot.

19) Do not use cutting oil. This use of cutting

oil may cause a fire.

20) Do not cut workpieces covered or stained

with gas, oil, solvents, thinners, etc.

Exposure to these materials may damage

the transparent guard.

21) Do not remove the transparent and lower

guards. If the transparent and lower guards

is damaged or missing, return tool to

authorized service center for replacement.

22) Do not start the blade when in contact

with workpiece. Wait for blade to reach full

speed before beginning cut.

Symbol

Meaning

Volts

Direct current

No load speed

··· min

-1

Revolutions or

reciprocations

Amperes

WARNING

• Do not use other than the Panasonic battery

packs that are designed for use with this

rechargeable tool.

• Do not dispose of the battery pack in a fire,

or expose it to excessive heat.

•

Do not drive the likes of nails into the bat-

tery pack, subject it to shocks, dismantle it, or

attempt to modify it.

• Do not allow metal objects to touch the bat-

tery pack terminals.

• Do not carry or store the battery pack in

the same container as nails or similar metal

objects.

•

Do not charge the battery pack in a high-

temperature location, such as next to a fire or

in direct sunlight. Otherwise, the battery may

overheat, catch fire, or explode.

•

Never use other than the dedicated charger

to charge the battery pack. Otherwise, the

battery may leak, overheat, or explode.

•

After removing the battery pack from the

tool or the charger, always reattach the pack

cover. Otherwise, the battery contacts could

be shorted, leading to a risk of fire.

III

. ASSEMBLY

Attaching or Removing Battery

Pack

CAUTION:

Before inserting battery pack, check that the

power switch in the tool actuates properly and

returns to the “OFF” position when released.

1. To connect the battery pack (See Fig. 2)

Line up the alignment marks and attach the

battery pack.

• Slide the battery pack until it locks into posi-

tion.

Alignment

marks

Fig. 2

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic EY4542 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info