619940
43
Zoom out
Zoom in
Vorherige Seite
1/48
Nächste Seite
Useful Information
43
Troubleshooting
If you still have difficulties after following the instructions in this section, disconnect the base unit’s AC
adaptor and turn off the handset, then reconnect the base unit’s AC adaptor and turn on the handset.
General use
Problem Cause/solution
The handset does not
automatically turn on after
installing/replacing batteries.
L The battery is empty or too weak to turn on the power. Place the
handset on the charger, and let it charge.
The unit does not work. L Make sure the batteries are installed correctly (page 8).
L Fully charge the batteries (page 8).
L Check the connections (page 8).
L Unplug the base unit’s AC adaptor to reset the unit and turn off
the handset. Reconnect the adaptor, turn on the handset and
try again.
L The handset has not been registered to the base unit. Register
the handset (page 27).
I cannot hear a dial tone. L Make sure that you are using the supplied telephone line cord.
Your old telephone line cord may have a different wiring
configuration.
L The base unit’s AC adaptor or telephone line cord is not
connected. Check the connections.
L If you are using a splitter to connect the unit, remove the splitter
and connect the unit to the wall jack directly. If the unit operates
properly, check the splitter.
L Disconnect the base unit from the telephone line and connect
the line to a known working telephone. If the working telephone
operates properly, contact our service personnel to have the
unit repaired. If the working telephone does not operate
properly, contact your service provider/telephone company.
I do not know how to erase y
(Missed call) from the display.
L There are unviewed missed calls remaining. View them and
erase y in the following way.
Base unit:
1 \ (right soft key)
2 Press {V} to search from the most recent call, or press {^}
to search from the oldest call.
Handset:
1 8 (middle soft key)
2 {V}/{^}: Caller List i M
3 Press {V} to search from the most recent call, or press {^}
to search from the oldest call.
TG6451_6461FX(e-e).book Page 43 Monday, May 4, 2009 8:55 AM
43

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

panasonic-kx-tg6451

Suche zurücksetzen

  • Wie kann ich denn beim 6461g eine gesperrte Telefonnummer wieder entsperren? Eingereicht am 3-8-2020 09:47

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Panasonic KX-TG6451 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info