628752
2
Zoom out
Zoom in
Vorherige Seite
1/4
Nächste Seite
Getting Started
1
1-A Accessories 1-B Location of Controls
For extra orders, call 1-800-332-5368.
1-C Settings
Power Outlet
(AC 120 V, 60 Hz)
AC Adaptor
The AC adaptor must remain connected at all times. (It is normal for the adaptor to
feel warm during use.)
1
Connect the charger unit as shown.
2
Install the battery in the handset.
Install the battery in the handset with the charge contacts
facing down and close the handset cover, locking it into place.
Charge
Contacts
H
7
1
0
3
2
4
6
8
9
5
Charge Contacts
Display
Function Buttons
Headset Jack
Charge Contacts
Charger
AC Adaptor
Speaker
Things You Should Know
3
Charger unit ....................1
Order No. PQWETGA100N
Battery ............................1
Order No. PQWBTG1000N
Belt Clip ..........................1
Order No. PQZHTG1000N
Handset Cover ................1
Order No. PQYNTG1000N
Plugging an optional headset into the handset allows a hands-free phone
conversation. Please use only the Panasonic KX-TCA88 headset.
To order, call the accessories telephone number in section 1-A.
Connecting the optional headset to the handset
Open the headset jack cover,
and connect the optional
headset to the headset jack
as shown.
3-A Belt Clip
You can hang the handset on your belt or pocket using the belt clip.
To attach the belt clip To remove the belt clip
When the optional headset is connected to the handset, make sure to use the
headset to talk with the caller. If you want to have a normal cordless phone
conversation, disconnect the headset.
3-B Optional Headset
Headset
Jack
H
3-C Battery Replacement
If “LOW BATTERY” is displayed and/or “ ” flashes after being fully charged,
replace the battery with a new Panasonic PQWBTG1000N battery.
To order, call the accessories telephone number in section 1-A.
1
Remove the cover by sliding
while pressing the arrow.
2
Replace the battery in the
handset with the charge
contacts facing down.
3
Close the cover.
Make sure to charge the
new battery for 12 hours.
3-D Wall Mounting
The charger can be wall mounted.
Install screws using the wall
template below. Mount the charger,
then slide it down.
Screws
To Power
Outlet
Wall Template
Charge
Contacts
Handset
Charger unit
2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Panasonic KX-TGA100N wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info