619776
4
Zoom out
Zoom in
Vorherige Seite
1/80
Nächste Seite
The SIP-CS must only be installed and serviced by qualified service personnel. The SIP-CS should be
used as-is from the time of purchase; it should not be disassembled or modified. Disassembly or
modification can cause a fire, electric shock, or damage to the SIP-CS.
Make sure that the wall that the SIP-CS will be attached to is strong enough to support the SIP-CS (approx.
290 g). If not, it is necessary for the wall to be reinforced.
Only use the wall-mounting equipment (screws, washers) included with the SIP-CS.
When the SIP-CS is no longer in use, make sure to detach it from the wall.
Disconnect the SIP-CS from the AC outlet, disconnect the LAN cable, and contact the dealer if:
The AC adaptor cord or AC plug becomes damaged or frayed.
The SIP-CS is exposed to rain, water, or any other liquid.
The SIP-CS is dropped or damaged.
Internal components are exposed due to damage.
The SIP-CS does not operate properly.
Performance deteriorates.
Disconnect the SIP-CS from the AC outlet and disconnect the LAN cable if the SIP-CS emits smoke, an
abnormal smell, or makes unusual noise. These conditions can cause fire or electric shock. Confirm that
smoke has stopped and contact an authorised service centre.
Clean the AC plug periodically with a soft, dry cloth to remove dust and other debris.
If using an AC adaptor, use only the optional AC adaptor KX-A239CE (PQLV206CE), KX-A239UK
(PQLV206E), KX-A239BX (PQLV206CE), KX-A239EJ (PQLV206E), or KX-A239AL (PQLV206AL).
If damage to the SIP-CS exposes any internal parts, immediately disconnect the cable or cord. If the power
is supplied from the network to the SIP-CS (Power-over-Ethernet), disconnect the Ethernet cables.
Otherwise, disconnect the AC adaptor cord. Then return the SIP-CS to a service centre.
The SIP-CS should only be connected to a power supply of the type shown on the label on the SIP-CS.
Completely insert the AC adaptor/power plug into the AC outlet. Failure to do so may cause electric shock
and/or excessive heat resulting in a fire.
CAUTION
Do not stretch or bend the cables. Also, do not allow anything to rest on the cables.
Do not bundle cables that are connected to the SIP-CS with the AC power cords of machines located
nearby.
To prevent malfunction, deformity, overheating, rust, and discolouration, do not install or place equipment
in the following types of locations:
Locations where air ventilation is poor.
Locations that may be exposed to sulphurous gas, such as near hot springs.
Near devices that emit heat, such as heaters.
Near devices that emit electromagnetic noise, such as radios or televisions.
Near devices that emit high-frequency noise, such as sewing machines or welders.
The SIP-CS and the cables should never be placed near or over a radiator or other heat source.
The SIP-CS should not be placed outdoors (use indoors).
4 Installation Guide
1 For Your Safety
4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Panasonic KX-UDS124 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info