Bedienungsanleitung Panasonic SAXR30 (Seite 20 von 20) (Englisch)

612597

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

RQT7514-B

H0104RF0

Matsushita Electric Industrial Co., Ltd.

Web Site: http://www.panasonic.co.jp/global/

Troubleshooting guide

Before requesting service, make the below checks.

If you can’t fix the unit as described or if something not listed here occurs, contact your dealer.

n Common problems Pages

n Sound modes Pages

n Radio Pages

n Setup menus and factory settings

(Reference pages are shown as black circled number  )

Maintenance

To clean this unit, wipe with a soft, dry cloth.

• Never use alcohol, paint thinner or benzine to clean this unit.

• Before using chemically treated cloth, read the instructions that came with the cloth carefully.

No power. • Ensure the AC mains lead is connected. 5

No sound.

• Turn the volume up.

• Check connections to speakers and other equipment.

• Select the correct source.

• Turn on the speakers.

• Change the D-INPUT setting to suit the type of connection you have made.

• Check that the digital signals can be decoded by this unit.

• Turn PCM FIX or DTS FIX off.

4-7

8, 17

Sound stops. “F 76” or

“OVERLOAD” appears on the

display for about a second, and

the unit turns off.

• Determine and correct the cause, then turn the unit on.

Causes include:

− Shorting (bare wires touching) of positive and negative speaker wires.

− Using speakers with an impedance lower than that rated for this unit.

− Straining of the speakers through excessive volume or power.

− Using the unit in a hot environment without proper ventilation.

Consult your dealer if the problem occurs again after switching the unit on.

–

“F 70” appears on the display. • Turn the unit off, disconnect the AC mains lead, and consult your dealer. –

Sound is not heard from the center,

surround, or subwoofer speakers.

• Ensure the SPEAKERS settings for your speakers are correct.

• Turn 2CH MIX off.

• The source may be stereo. Change the sound mode.

Cannot use Dolby Pro Logic Ⅱ or

SFC.

• You cannot use Dolby Pro Logic Ⅱ or SFC when input is PCM with sampling frequencies

of 192, 176.4 (COAXIAL1), 96, or 88.2 kHz.

There is no DTS audio output.

There is Audio output, but the DTS

decoder indicator is not lit.

• Check the DVD player’s digital output settings. –

The radio cannot be tuned in or

there is a lot of noise and

interference.

• Connect the appropriate antenna. (You may need an outdoor antenna or one with more elements.)

• Adjust the position of the FM or AM antenna.

• Reduce the treble.

• Turn off nearby televisions, video decks, DVD players, and satellite receivers.

• Separate the antenna from other cables, leads, and appliances.

–

The correct AM frequency cannot

be tuned in.

• Change the frequency step. Hold [-BAND, –FM MODE] or [BAND] down for 3 seconds to

change the step to suit your area when AM is selected.

Main menu Sub menu (factory settings) Main menu Sub menu (factory settings)

SPEAKERS

FRONT

SMALL



A/D ATT

OFF



CENTER

DR COMP

OFF

SURROUND

B PROOF

MODE A



SUB-WFR YES

DIMMER

OFF 

DISTANCE

FRONT

3.0 m

DUAL PRG

MAIN 

CENTER

SURROUND 1.5 m

FILTER

100

D-INPUT

TV OPT 1

DVR OPT 2

DVD COAX 1

CD COAX 2

IN MODE

AUTO

DVR

DVD

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SAXR30 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SAXR30

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info