Bedienungsanleitung Panasonic sc ak 340 (Seite 18 von 20) (Englisch)

159281

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

RQT8043

RQTV0066

LANG - 5 LANG - 4 FRANÇAIS DANSK ESPAÑOL

Playing discs

The display is wrong or play won’t

start.

The disc may be upside down. !

Wipe the disc.

Replace the disc if it is scratched, warped, or non-standard.

Condensation may have formed inside the unit due to a sudden change in

temperature. Wait for about an hour for it to clear and try again.

The total number of tracks

displayed differs each time the

same disc is inserted.

Unusual sound is heard.

The disc may be scratched, or its data may be defective. Replace the disc.

CD-RW cannot be read.

The disc was incompletely formatted. Use the recording equipment to fully

format the disc before recording.

“VBR–” is displayed instead of the

remaining play time.

The unit cannot display the remaining play time for variable bit rate (VBR) tracks.

Disc trays

Disc tray(s) cannot open.

“CHGR ERR ” is displayed.

Press [y/I] to release the jammed tray(s) as the unit will switch off. Switch it on

again and the tray(s) will initialize to the previous tray(s) condition.

If this still does not ﬁ x the problem, please consult the dealer.

Remote control

Remote control doesn’t work.

Check that the batteries are inserted correctly. 5

Replace the batteries if they are worn.

Memory reset (Initialization)

When the following situations occur, refer to the instructions below to reset the memory:

• There is no response when buttons are pressed.

• You want to clear and reset the memory contents.

To reset memory

1 Disconnect the AC mains lead. (Wait at least 3 minutes before proceeding to step 2)

2 While pressing and holding down [y/I] on the main unit, reconnect the AC mains lead.

“– – – – – – – – –” appears on the display.

3 Release [y/I].

All the settings are returned to the factory preset.

You will need to reset the memory items.

Safety precautions

Troubleshooting guide (Continued)

Placement

Set the unit up on an even surface away from direct sunlight,

high temperatures, high humidity, and excessive vibration. These

conditions can damage the cabinet and other components, thereby

shortening the unit’s service life.

Place it at least 15 cm away from wall surfaces to avoid distortion

and unwanted acoustical effects.

Do not place heavy items on the unit.

Voltage

Do not use high voltage power sources. This can overload the unit

and cause a ﬁ re.

Do not use a DC power source. Check the source carefully when

setting the unit up on a ship or other place where DC is used.

AC mains lead protection

Ensure the AC mains lead is connected correctly and not damaged.

Poor connection and lead damage can cause ﬁ re or electric shock.

Do not pull, bend, or place heavy items on the lead.

Grasp the plug ﬁ rmly when unplugging the lead. Pulling the AC

mains lead can cause electric shock.

Do not handle the plug with wet hands. This can cause electric

shock.

Foreign matter

Do not let metal objects fall inside the unit. This can cause electric

shock or malfunction.

Do not let liquids get into the unit. This can cause electric shock or

malfunction. If this occurs, immediately disconnect the unit from the

power supply and contact your dealer.

Do not spray insecticides onto or into the unit. They contain

ﬂ ammable gases which can ignite if sprayed into the unit.

Service

Do not attempt to repair this unit by yourself. If sound is interrupted,

indicators fail to light, smoke appears, or any other problem that is

not covered in these instructions occurs, disconnect the AC mains

lead and contact your dealer or an authorized service center.

Electric shock or damage to the unit can occur if the unit is repaired,

disassembled or reconstructed by unqualiﬁ ed persons.

Extend operating life by disconnecting the unit from the power

source if it is not to be used for a long time.

RQTV0066-B.indd 18RQTV0066-B.indd 18 11/16/05 9:37:42 AM11/16/05 9:37:42 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic sc ak 340 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic sc ak 340

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info