370515
34
Zoom out
Zoom in
Vorherige Seite
1/36
Nächste Seite
34
RQT6721
Reference
Troubleshooting guide
Before requesting service, make the below checks. If you are in doubt about some of the check points, or if the remedies indicated in the chart do
not solve the problem, consult your dealer for instructions.
Power Page
Operation
Sound
No power. Insert the AC mains lead and system cable securely. 9
The unit is automatically
switched to the standby mode.
The unit was switched to standby by the sleep timer. 28
No response when buttons
pressed.
Some operations may be prohibited by the disc.
The unit may not be operating properly due to lightning, static electricity or some other external
factor.
Reset procedure:
Press [Í] to switch the unit to the standby mode and then back to ON.
Alternatively, press [Í] to switch the unit to the standby mode, disconnect the AC mains lead,
and then reconnect it.
No operations can be performed
with the remote control.
Check that the batteries are installed correctly.
The batteries are depleted: Replace them with new ones.
Point the remote control at the remote control sensor and operate.
9
9
Cannot switch on the television
with the remote control.
Press [TV] first to operate the television.
Play doesn’t start (or stops
immediately) when you press
[1] (play).
Condensation has formed: Wait 1 to 2 hours for it to evaporate.
This unit cannot play discs other than the ones listed in these operating instructions.
You can only play DVD-Video if their region number is the same or includes the same region
number as the unit or if the DVD-Video is marked “ALL”. Confirm the region number for the unit
on the rear panel.
The disc may be dirty and may require cleaning.
Ensure that the disc is installed with the label of the side to be played facing upwards.
Check that the DVD-RAM has something recorded on it.
5
Cover
5
13
Cannot select alternative
languages.
This function is dependent on software availability.
Try selecting from the disc’s menu if one is available.
14
No menu play. This function is dependent on software availability.
No subtitles. This function is dependent on software availability.
Subtitles are cleared from the television. Display the subtitles.
17
The position of the subtitles is
incorrect.
Change the position of the subtitles with “Subtitle Position” in the GUI screen. 23
Soundtrack and/or subtitle
language is not the one selected
with the SETUP menus.
This function is dependent on software availability.
Cannot change angle. This function is dependent on software availability. Even if a disc has a number of angles
recorded, these angles may be recorded for specific scenes only.
The SETUP menu cannot be
accessed.
Select “DVD/CD” as the source.
Cancel all group, program and random play.
16
Cannot add markers. You cannot add markers while playing a play list or if the disc’s play time doesn’t appear on the
unit’s display.
There are already markers. [RAM] The unit reads and displays the markers added with a DVD video recorder. You can clear them
but reappear when you switch the unit to standby, change the source, or open the disc tray.
Marker numbers I added are
different when I call them up.
[RAM]
The unit numbers markers by time so they change when you add and delete them.
Cannot select random or
program play.
You cannot select random or program play with some DVD-Video.
Folders deeper than the eighth
layer on a data CD are not
displayed correctly.
Folders deeper than the eighth layer are displayed as the eighth layer.
You have forgotten your ratings
password.
Reset all the SETUP settings to
Factory Preset.
While stopped and “DVD/CD” is the source, press and hold [] on the unit and [S10] on the
remote control for about 3 seconds until “Initialized” disappears from the television. Turn the unit
off and on again.
All settings will return to the default values.
No sound.
Distorted sound.
Check the connections.
Turn the volume up.
Turn muting off.
Switch off the unit, determine and correct the cause, then switch the unit on.
Causes include:
Shorting (bare wires touching) of positive and negative speaker wires.
Using speakers with an impedance lower than that rated for this unit.
Straining of the speakers through excessive volume or power.
Using the unit in a hot environment without proper ventilation.
7
28
Humming heard during play. An AC mains lead or fluorescent light is near the subwoofer. Keep other appliances and cords
away from the subwoofer.
34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Panasonic sc mt 1 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Panasonic sc mt 1

Panasonic sc mt 1 Bedienungsanleitung - Holländisch - 36 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info