Bedienungsanleitung Panasonic SC-PMX100 (Seite 20 von 24) (Englisch)

618452

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

RQT9995

“--:--”

• You connected the AC mains lead for the first time or

there was a power failure recently. Set the clock.

“Adjust Clock”

• Clock is not set. Adjust the clock accordingly.

“Adjust Timer”

• Play timer is not set. Adjust the play timer accordingly.

“Auto Off”

• The unit has been left unused for about 20 minutes

and will shut down in a minute. Press any button to

cancel it.

“Checking Connection”

• The unit is checking the connected iPhone/iPad/iPod

or USB device.

• If this display keeps appearing, make sure that the

battery of the iPhone/iPad/iPod is not depleted and

that the iPhone/iPad/iPod is turned on and connected

correctly.

“DL Error”

• The software download has failed. Press any button to

exit. Please try again later.

• The server cannot be found. Press any button to exit.

Make sure that the wireless network is connected to

the Internet.

“Error”

• An incorrect operation was done. Read the instructions

and try again.

“F” / “F” (“  ” stands for a number.)

• There is a problem with this unit.

Write down the displayed number, disconnect the AC

mains lead and consult your dealer.

“Fail”

• Updating or setting has failed. Read the instructions

and try again.

“Level 0”

• There is no link between this system and the wireless

router.

Try the following operations:

jCheck that the wireless router is turned on.

jTurn this system off and on again.

jReset the wireless network settings. (> 6)

If the problem persists, consult your dealer.

“Linking”

• This system is trying to connect to the last connected

Bluetooth

device when “BLUETOOTH” is selected.

• This system is communicating with the wireless router

to complete the network settings.

Depending on the wireless router this process may

take a few minutes. Try moving this system closer to

the wireless router.

“Network Initializing”

“Setup in Progress, Try Again”

• The system is carrying out an internal process.

– Wait for approximately 3 minutes.

– Do not disconnect the AC mains lead. Doing so may

cause malfunction.

“No Connect”

• This system cannot connect to the network.

Check the network connection. (> 6)

“No Device”

• The iPhone/iPad/iPod or USB device is not connected.

Examine the connection.

• The battery of the iPhone/iPad/iPod is depleted.

Charge the iPhone/iPad/iPod and turn it on before

connecting.

“No Disc”

• You have not put in a disc or put in a disc that the

system cannot play.

“No Memory” ([PMX100B])

• There are no preset DAB stations to select. Preset

some channels.

“No Play”

• Examine the content. You can only play supported

format.

• The files in the USB device can be corrupted. Format

the USB device and try again.

• The unit may have a problem. Turn the unit off and

then on again.

“No Signal” ([PMX100B])

• This station cannot be received. Check your antenna.

“Device No Response”

“Hub Not Supported”

“Not Supported”

• You have connected an iPhone/iPad/iPod that cannot

be played.

• If the iPhone/iPad/iPod is compatible, turn it on and

connect it correctly.

• You have connected an unsupported USB device.

“PC Unlocked”

• “PC” is selected, but a PC is not connected.

“PGM Full”

• The number of programmed tracks is more than 24.

“Playerror”

• You played an unsupported file. The system will skip

that track and play the next one.

“Reading”

• The unit is checking the CD information. After this

display has disappeared, start operating.

“Remote ” (“  ” stands for a number.)

• The remote control and this unit are using different

codes. Change the code on the remote control.

– When “Remote 1” is displayed, press and hold [OK] and

[1] for at least 4 seconds.

– When “Remote 2” is displayed, press and hold [OK] and

[2] for at least 4 seconds.

“Scan Failed” ([PMX100B])

• Stations are not receivable. Check your antenna and try

DAB manual tuning.

“USB Over Current Error”

• The iPhone/iPad/iPod or USB device is drawing too

much power. Remove the iPhone/iPad/iPod or USB

device. Switch the system off and on again.

“VBR”

• The system cannot show the remaining play time for

variable bit rate (VBR) tracks.

“WAC Mode”

• “Method 1” of network setting method is available.

(> 6)

• To exit “WAC Mode”, press [∫].

“Wait”

• This is displayed, for example, when this unit is turning

off.

• This is flashing when the system is trying to enter a

network setting mode.

“ ” blinks

• This may occur when, for instance, the network

connection is interrupted.

Main unit displays

SC-PMX100-100B_EGEBGN-RQT9995-3B.book 20 ページ２０１５年８月１２日　水曜日　午後２時３１分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SC-PMX100 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SC-PMX100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info