Bedienungsanleitung Panasonic SC-PMX80 (Seite 13 von 16) (Englisch)

663741

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

TQBJ0999

The device is connected but audio cannot be heard

through this system.

• For some built-in Bluetooth

devices, you have to set

the audio output to “SC-PMX82” or “SC-PMX80”

manually. Read the operating instructions for the

device for details.

The sound is interrupted.

• The device is out of the 10 m communication range.

Bring the Bluetooth

device closer to this system.

• Remove any obstacle between this system and the

device.

• Other devices that use the 2.4 GHz frequency band

(wireless router, microwaves, cordless phones, etc.)

are interfering. Bring the Bluetooth

device closer to

this system and distance it from the other devices.

• Select “MODE 1” for stable communication. ( 6)

The PC does not recognise this system.

• Check your operating environment. ( 11)

• Restart the PC, turn off and on this system, and then

reconnect the USB cable.

• Use another USB port of the connected PC.

• Install the dedicated driver if using a PC with Windows.

“--:--”

• You connected the AC mains lead for the first time or

there was a power failure recently. Set the clock.

“ADJUST CLOCK”

• Clock is not set. Adjust the clock accordingly.

“ADJUST TIMER”

• Play timer is not set. Adjust the play timer accordingly.

“AUTO OFF”

• The unit has been left unused for about 20 minutes

and will shut down in a minute. Press any button to

cancel it.

“CHECKING CONNECTION”

• The unit is checking the connected iPhone/iPad/iPod

or USB device.

• If this display keeps appearing, make sure that the

battery of the iPhone/iPad/iPod is not depleted and

that the iPhone/iPad/iPod is turned on and connected

correctly.

“ERROR”

• An incorrect operation was done. Read the instructions

and try again.

“F” / “F” (“  ” stands for a number.)

• There is a problem with this unit.

Disconnect the AC mains lead from the AC outlet, reconnect

it to the outlet after about 30 seconds. Wait for about 10

seconds, then turn on the unit. If the problem still persists,

disconnect the AC mains lead and consult your dealer.

“NO DEVICE”

• The iPhone/iPad/iPod or USB device is not connected.

Examine the connection.

• The battery of the iPhone/iPad/iPod is depleted. Charge

the iPhone/iPad/iPod and turn it on before connecting.

“NO DISC”

• You have not put in a disc or put in a disc that the

system cannot play.

“NO PLAY”

• Examine the content. You can only play supported

format. ( 14)

• The files in the USB device can be corrupted. Format

the USB device and try again.

• The unit may have a problem. Turn the unit off and

then on again.

“NO PRESET” ([PMX82])

• There are no preset DAB/DAB+ stations to select.

Preset some channels.

“NO SIGNAL” ([PMX82])

• This station cannot be received. Check your antenna.

“DEVICE NO RESPONSE”

“HUB NOT SUPPORTED”

“NOT SUPPORTED”

• You have connected an iPhone/iPad/iPod that cannot

be played.

• If the iPhone/iPad/iPod is compatible, turn it on and

connect it correctly.

• You have connected an unsupported USB device.

“PC UNLOCKED”

• “PC” is selected, but a PC is not connected.

“PGM FULL”

• The number of programmed tracks is more than 24.

“PLAYERROR”

• You played an unsupported file. The system will skip

that track and play the next one.

“READING”

• The unit is checking the CD information. After this

display has disappeared, start operating.

• When starting playback of DSD files, it may take time

to read the file. Wait until reading completes.

“REMOTE ” (“  ” stands for a number.)

• The remote control and this unit are using different

codes. Change the code on the remote control.

– When “REMOTE 1” is displayed, press and hold [OK]

and [1] for at least 4 seconds.

– When “REMOTE 2” is displayed, press and hold [OK]

and [2] for at least 4 seconds.

“SCAN FAILED” ([PMX82])

• Stations are not receivable. Check your antenna and try

DAB/DAB+ manual tuning.

“USB OVER CURRENT ERROR”

• The iPhone/iPad/iPod or USB device is drawing too

much power. Remove the iPhone/iPad/iPod or USB

device. Switch the system off and on again.

“VBR”

• The system cannot show the remaining play time for

variable bit rate (VBR) tracks.

“WAIT”

• This is displayed, for example, when this unit is turning

off.

Reset the memory when the following situations occur:

• There is no response when buttons are pressed.

• You want to clear and reset the memory contents.

1 Disconnect the AC mains lead.

Wait 30 seconds before you continue with step 2.

2 While you press and hold [Í/I] on the main unit,

connect the AC mains lead again.

Keep holding down [Í/I] until “---------” appears on

the display.

3 Release [Í/I].

All the settings are set back to the factory default.

It is necessary to set the memory items again.

When other Panasonic equipment responds to the

remote control of this system, change the remote control

code for this system.

To set the code to “REMOTE 2”

Press [SELECTOR] on the main unit to select “CD”.

Press and hold [

∫

] on the main unit and [2] on the

remote control until “REMOTE 2” is shown.

3 Press and hold [OK] and [2] for a minimum of

4 seconds.

• The factory default is “REMOTE 1”.

• To change the mode back to “REMOTE 1”, repeat the

steps above but replace the button pressed on the

remote control from [2] to [1].

Main unit displays

Memory reset (initialisation)

Remote control code

SC-PMX80-82-EGEBGN~TQBJ0999.book 13 ページ２０１７年４月１３日　木曜日　午後２時８分

Panasonic SC-PMX80 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SC-PMX80

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info