Bedienungsanleitung Panasonic SCAK220 (Seite 14 von 16) (Englisch)

612683

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

RQT7528

Use outdoor antenna if radio reception is poor.

Note

Disconnect the outdoor antenna when the unit is not in use.

Do not use the outdoor antenna during a lightning storm.

FM outdoor antenna

•

Disconnect the FM indoor antenna.

•

The antenna should be installed by a competent technician.

AM outdoor antenna

Run a piece of vinyl wire horizontally across a window or other

convenient location.

Leave the loop antenna connected.

Optional antenna connections

1. Damage requiring service —The unit should be serviced by

qualified service personnel if:

(a)The AC power supply cord or AC adaptor has been damaged; or

(b)Objects or liquids have gotten into the unit; or

(c)The unit has been exposed to rain; or

(d)The unit does not operate normally or exhibits a marked change

in performance; or

(e)The unit has been dropped or the cabinet damaged.

2. Servicing —Do not attempt to service the unit beyond that

described in these operating instructions. Refer all other servicing

to authorized servicing personnel.

3. Replacement parts —When parts need replacing ensure the

servicer uses parts specified by the manufacturer or parts that

have the same characteristics as the original parts. Unauthorized

substitutes may result in fire, electric shock, or other hazards.

Product Service

Product information

For product information or assistance with product operation:

In the U.S.A., refer to “Customer Services Directory” on the

back page.

In Canada, contact the Panasonic Canada Inc. Customer Care

Centre at 905-624-5505, or visit the website (www.panasonic.ca),

or an authorized Servicentre closest to you.

4. Safety check —After repairs or service, ask the servicer to

perform safety checks to confirm that the unit is in proper working

condition.

Shield braid

Core wire

”

)

(

”

)

FM outdoor antenna

(not included)

75 Ω coaxial cable (not included)

Shield braid

Core wire

AM outdoor antenna (not included)

AM loop

antenna

(included)

5 -12

(

16 – 40

ft.)

CASSETTE DECK SECTION

Track system 4 track, 2 channel

Heads

Record/playback Solid permalloy head

Erasure Double gap ferrite head

Motor DC servo motor

Recording system AC bias 100 kHz

Erasing system AC erase 100 kHz

Tape speed 4.8 cm/s (1

ips)

Overall frequency response

(+3 dB, –6 dB at DECK OUT)

NORMAL (TYPE I) 35 Hz–14 kHz

S/N 50 dB (A weighted)

Wow and flutter 0.18% (WRMS)

Fast forward and rewind time

Approx. 120 seconds with

C-60 cassette tape

CD SECTION

Sampling frequency 44.1

kHz

Decoding 16 bit linear

Beam source/wavelength

Semiconductor laser/780

Number of channels Stereo

Frequency response

Hz–20

kHz (+1, –2

dB)

Wow and flutter Below measurable limit

Digital filter 8

D/A converter MASH (1 bit DAC)

MP3

Bit rate 32

kbps–320

kbps

Sampling frequency

kHz, 44.1

kHz, 48

kHz

Specifications

AMPLIFIER SECTION

FTC output power

THD 10%, both channels driven

Hz–16

kHz

W per channel (6

Ω)

Total FTC power 120

RMS output power

THD 10%, both channels driven

kHz 80

W per channel (6

Ω)

Total RMS power 160

Input sensitivity

AUX 250

Input impedance

AUX 13.3

kΩ

FM TUNER SECTION

Frequency range

87.9–107.9

MHz (200

kHz steps)

87.5–108.0

MHz (100

kHz steps)

Sensitivity 2.5

ØV (IHF)

S/N 26

dB 2.2

ØV

Antenna terminal(s) 75

Ω (unbalanced)

AM TUNER SECTION

Frequency range

520–1710

kHz (10

kHz steps)

Sensitivity

S/N 20

dB (at 1000

kHz) 560

ØV/m

SPEAKER SECTION

Type 2 way, 2 speaker system

Speaker(s)

Woofer 16

cm (6

˝) cone type

Tweeter 6

cm (2

˝) cone type

Impedance 6

Ω

Input power (IEC) 80

W (Max)

Output sound pressure level

dB/W (1.0

Cross over frequency 4 kHz

Frequency range 35

Hz–28

kHz (–16

dB)

Hz–26

kHz (–10

dB)

Dimensions (WxHxD) 220 x 330 x 207

˝ x 13˝ x 8

˝)

Mass 2.7

kg (6.0

lb.)

GENERAL

Power supply AC 120

V, 60

Power consumption

165 W

Dimensions (WxHxD) 250 x 330 x 363

˝ x 13˝ x 14

˝)

Mass 7.3 kg (16.1 lb.)

Power consumption in standby mode: 0.34

Note:

1. Specifications are subject to change

without notice.

Mass and dimensions are approximate.

2. Total harmonic distortion is measured by

the digital spectrum analyzer.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SCAK220 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SCAK220

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info