Bedienungsanleitung Panasonic SCAK331 (Seite 29 von 32) (Englisch, Spanisch)

612721

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

RQT7799

Using the play/record timer

Remote control only

You can set the timer to come on at a certain time to wake you up (play

timer) or to record a radio station or from the aux source (record timer).

The play and record timers cannot be used together.

Preparations:

•

Turn the unit on and set the clock (A page 12).

•

For the play timer, prepare the desired music source (tape/disc/

radio/aux), and set the volume.

•

For the record timer, check the cassette’s erasure prevention tabs

(A page 12) and insert the tape in deck 2 (A page 11). Tune to

the radio station (A page 10) or select the aux source (A page

14).

1 Press [SHIFT] + [CLOCK/TIMER] to select the timer

function.

Every time you press the button:

CLOCK

Previous dispaly

RECPLAY

rPLAY : to set the play timer

rREC : to set the record timer

(Proceed to the next step within 8 seconds)

2 ON time setting

1 Press [g, REW/3] or [f, 4/FF] to set the

time.

2 Press [SHIFT] + [CLOCK/TIMER].

OFF time setting

Repeat steps 1 and 2.

3 Press [SHIFT] + [rPLAY/REC] to display the timer

indicator.

Every time you press the button:

RECPLAY

(off)

rPLAY : to turn the play timer on

rREC : to turn the record timer on

(The indicator doesn’t appear if the ON and OFF times or the

clock hasn’t been set.)

4 Press [

f] to turn the unit off.

The unit must be off for the timers to operate.

•

Play timer: Play will start in the set condition at the set time

with volume increasing gradually to the set level.

•

Record timer: The unit comes on 30 seconds before the set

time with the volume muted.

To cancel the timer

Press [SHIFT] + [rPLAY/REC] to clear the timer indicator from the

display.

(The timer comes on at the set time everyday if the timer is on.)

To change the settings (when the unit is on)

To change the play/record times

Do steps 1, 2 and 4.

To change the source or volume

1. Press [SHIFT] + [rPLAY/REC] to clear the timer indicator from the

display.

2. Make changes to the source or volume.

3. Do steps 3 to 4.

To check the settings

Press [SHIFT] + [CLOCK/TIMER] while the unit is on to select “rPLAY”

or “rREC”.

The settings are shown in the following order:

Play timer: on time→ off time→ source→ volume

Record timer: on time→ off time→ source

To check the settings while the unit is off, press [SHIFT] + [CLOCK/

TIMER] twice.

Timers

If you use the unit after the timers are set

After using, check that the correct tape/disc are loaded before turning

the unit off.

Note

•

If you turn the unit off and on again while a timer is functioning, the

OFF time setting will not be activated.

•

If you selected AUX as the source, when the timer comes on, the

unit turns on and engages “AUX” as the source. If you want to

playback or record from a connected unit, set that unit’s timer to the

same time. (See the connected unit’s instruction manual.)

Using the sleep timer

Remote control only

This timer turns the unit off after a set time.

While enjoying the desired source:

Press [SLEEP] to select the time (minutes).

Every time you press the button:

SLEEP 90 SLEEP 120SLEEP 60SLEEP 30

SLEEP OFF

To cancel the sleep timer

Press [SLEEP] to select “SLEEP OFF”.

To confirm the remaining time

Press [SLEEP] once.

The remaining time is shown for about 5 seconds.

To change the setting

Press [SLEEP] to select the new setting.

You can use the sleep timer in combination with the play/record timer.

Make sure the unit is off before the play/record timer’s start time.

Note

The sleep timer will be turned off when you start recording.

Remote control only

Press [PRESET EQ] to select a setting.

Every time you press the button:

HEAVY SOFT CLEAR

EQ-OFF

(cancelled)

DISCO LIVE HALL

HEAVY (sound quality) : Adds punch to rock

SOFT (sound quality) : For background music

CLEAR (sound quality): Clarifies higher sounds

DISCO (sound field) : Produces sound with the same kind of

lengthy reverberations heard at a disco

LIVE (sound field) : Makes vocals more alive

HALL (sound field) : Adds an expansiveness to the sound to

produce the atmosphere of a great concert

hall

Note

You cannot use PRESET EQ together with H.BASS.

Enhancing the bass sound

You can enhance low-frequency sound so that heavy bass sound can

be heard clearly, even if the acoustics of your room are not optimal.

Press [H.BASS].

The button light comes on.

Press the button again to cancel.

The button light goes out.

Using the built-in sound quality/sound

field settings

Sound quality/sound field

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SCAK331 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SCAK331

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info