612777
4
Zoom out
Zoom in
Vorherige Seite
1/32
Nächste Seite
4
RQT0A22
Control reference guide
1 Standby/on switch (Í/I)
Touch to switch the unit from on to standby mode or vice
versa. In standby mode, the unit is still consuming a small
amount of power.
2 Open or close the sliding door
3 Basic playback control buttons
4 Adjust the volume (0 (min) to 50 (max))
5 Select the audio source
On this unit:
On the remote control:
[ ]: “BLUETOOTH”
[CD/USB]: “CD” ,. “USB”
6 Bluetooth
®
-pairing button
Touch to select “BLUETOOTH” as the audio source.
Touch and hold to enter pairing mode (l 11) or
disconnect a Bluetooth
®
device (l 12).
7 AUX IN jack (l 5)
8 Port for USB devices / DC OUT terminal (l 6)
9 ”: Network indicator
10 ”: Secondary service indicator
11 F: Play timer indicator
12 ”: 1-TRACK indicator
13 ”: 1-ALBUM indicator
14 “RND: RANDOM indicator
15 `: ON REPEAT indicator
16 NFC sensor (l 11)
17 Remote control signal sensor
Distance: Within approx. 7 m directly in front
Angle: Approx. 30o left and right
18 Sliding door
19 Display
20 Turn the unit on or off
21 Enter setup menu
22 Change the displayed information
23 Enter sound menu
24 Dim the display panel and indicators
Press again to cancel.
25 Mute the sound
Press again to cancel. “MUTE” is also cancelled when the
volume is adjusted or the unit is turned off.
26 Enter playback menu
27 Selection/OK
1
2
3
4
5
6
8
7
9 10 11 12 13 14 15
18 19
16
17
Top view Side view
ユヹヵノリワヶヴャ
20
5
3
21
22
23
2
24
4
25
26
27
“CD” ----------. “BLUETOOTH” ----------. “DAB+”
:;
“NETWORK” ( “USB”( “AUX” ( “FM”
[RADIO/EXT-IN]: “DAB+” --. “FM” --. “AUX”
^" “NETWORK”(}
§ These switches work just by touching the marks. Each
time you touch the switch, there will be a beep sound.
The beep sound can be set to off. (l 18)
Using the remote control
Insert the battery so the terminals (i and j) match those
in the remote control.
Point it at the remote control signal sensor on this unit.
To avoid interference, please do not put any objects in front of
signal sensor.
When the sliding door is opened, operate the remote control at
around the same level as the remote control signal sensor.
SC-ALL5CD-EGEBGN~RQT0A22.book 4 ページ 2015年4月23日 木曜日 午後4時44分
4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Panasonic SCALL5CDGN wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Panasonic SCALL5CDGN

Panasonic SCALL5CDGN Kurzanleitung - Englisch - 1 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info