Bedienungsanleitung Panasonic SCPM4DB (Seite 12 von 16) (Englisch)

618444

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

RQTV0212

Timer

Setting the clockSetting the clock

This is a 24-hour clock.

Press [CLOCK/TIMER] to select “CLOCK”.

Each time you press the button:

CLOCK

˚ PLAY

Original display

Within 5 seconds, press [ /4] or [ /¢] to set

the time.

Press [CLOCK/TIMER] again to confirm.

Displaying the clock

Press [CLOCK/TIMER] to display the clock for few

seconds.

Note

The clock may lose or gain minutes over a period of time. Readjust

as necessary.

Using the sleep timerUsing the sleep timer

This function enables you to turn off the unit automatically

after the set time.

Press [SLEEP] repeatedly to select your desired time.

Sleep timer indicator

To cancel

Press [SLEEP] to select “OFF”.

Changing the remaining time

Press [SLEEP] to show the remaining time, and press

[SLEEP] again to select your desired time.

Note

• The play and sleep timer can be used together.

• The sleep timer always has priority. Be sure not to overlap timer

settings.

Using the play timerUsing the play timer

You can set the timer to come on at a certain time to wake

you up.

Preparation

Turn the unit on and set the clock.

Prepare the music source you want to listen to; disc, radio

or music port source, and set the volume.

Press [CLOCK/TIMER] repeatedly to select play

timer.

CLOCK ˚ PLAY

Original display

Within 5 seconds, press [ /4] or [ /¢] to set

the starting time.

Play timer indicator

Start time

Press [CLOCK/TIMER] to confirm.

Repeat steps 2 and 3 to set the finishing time.

Finish time

To activate the timer

Press [˚PLAY] to turn on the timer.

“˚PLAY” is displayed.

Press [y] to turn off the unit.

The unit must be off for the timer to operate.

Action

change the settings Repeat steps 1 to 4 and 6.

change the source

or volume

1) Press [˚PLAY] to clear the timer

indicator from the display.

2) Make changes to the source or volume.

3) Perform steps 5 and 6.

check the settings

(when the unit is on

or in standby mode)

Press [CLOCK/TIMER] repeatedly to

select ˚PLAY.

cancel Press [˚PLAY] to clear the timer indicator

from the display.

Note

• The play timer will start at the preset time, with the volume

increasing gradually to the preset level.

• The timer comes on at the set time every day if the timer is on.

• The unit must be in the standby mode for the timer to function.

• If you turn the unit off and on again while a timer is functioning,

the ﬁ nish time setting will not be activated.

• If MUSIC PORT is selected as the source when the timer

comes on, the system turns on and engages MUSIC PORT

as the source. If you wish to playback from the portable audio

equipment, activate the equipment’s play mode and increase the

volume. (See the portable audio equipment’s instruction manual.)

PM4DB_EB.indd 12PM4DB_EB.indd 12 2/1/07 4:56:53 PM2/1/07 4:56:53 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SCPM4DB Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info