Bedienungsanleitung Panasonic SLCT520 (Seite 6 von 6) (Englisch)

618910

Zoom out

Zoom in

Vorherige Seite

1/6

Nächste Seite

RQT7814

MODE button

Each time you press and hold [EQ]

∫Specifying the AB segment

Press [MEMORY] at the start point (A) and once more at the end point (B).

≥Stop or skip (

➪

page 5) to cancel.

≥If you do not specify point B this will automatically be set as the end of the

disc. Repeat begins when this point is reached. You can specify point B

again by pressing [MEMORY].

RND

3d-1 3d-2

S-XBS

S-XBSr

TRAIN

(3D)

Each time you press [EQ], while displayed

Boosts

the bass

Reduces sound

leaks and

listening fatigue

Each time you press [MODE]

One track

repeat

All track

repeat

Random

repeat

No display (canceled)

≥“3d-1” or “3d-2” disappears after being selected and “3D” appears

instead.

≥The effect may differ with different kinds of music.

≥Depending on the recording conditions, sound may be interrupted

when switching between EQ settings.

≥If you select 3d-1 or 3d-2 then try playing a disc that contains both

CD-ROM format and CD-DA format tracks, there will be a brief noise

when the disc changes from playing the CD-ROM format track to the

CD-DA format one.

No display (canceled)

Enhanced

S-XBS

During play

While paused

Tone off

Tone on

bP on

bP oFF

AB repeat (

➪

below)

≥You cannot select “RND” and “A

B” while playing MP3.

Sound

field of

Enhanced

3d-1

Each time you press and hold [MODE]

No display

(canceled)

Album mode

MODE

MEMORY

3d-1

EQ button

MODE

MEMORY

Changing the sound quality Play modes

Changing the remote control operation tone

Playing only the tracks in a selected album (Album mode)

≥To select another album (

➪

page 5, Album skip)

≥You cannot turn album mode on during program play (

➪

below).

MP3

Using the Remote Control

While stopped, each time you press and hold [MEMORY]

≥You cannot change the memory time for MP3. It’s a maximum of

100 seconds for MP3 recorded at 128 kbps.

1/∫

MEMORY

Confirm

1/∫

Press during play.

(“M” disappears.)

Press during play.

Press after all desired

tracks have been

programmed.

While stopped, use [:] or [9] to select the track,

then press [MEMORY].

Track number

Sequence number

Repeat to program up to 20 tracks.

Sequence

number

Track numberAlbum number

POS1

POS2

You can regenerate signal frequency lost during compression,

restoring the sound to near pre-compression form.

While stopped, each time you press and hold [MEMORY]

RMTR

Sound enhanced

No display

Conserves battery life

MODE

MEMORY

POS1

MEMORY

button

3 -- 01

Will appear after

[MEMORY] is pressed

3 1

-- 01

ALBUM

The anti-skip function (ANTI-SKIP SYSTEM) reduces or eliminates

skipping caused by vibration. You can change the anti-skip memory

time.

Program desired tracks only (Program play)

Changing the anti-skip mode

Enjoying more natural sound (Digital Re-master)

MP3

CD-DA

MP3

Sound enhanced mode,

10-second anti-skip memory

Anti-skip enhanced mode,

45-second anti-skip memory

CD-DA

Cancel

Play

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic SLCT520 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic SLCT520

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info