568706
2
Zoom out
Zoom in
Vorherige Seite
1/2
Nächste Seite
BEFORE YOU BEGIN, READ THE SAFETY PRECAUTIONS AND IMPORTANT SAFETY INSTRUCTIONS INCLUDED IN THE OWNERS MANUAL.
OPTIONAL Setting up the soundbar
To nd your iOS version:
SETTINGS GENERAL ABOUT
If your version is not 4.3, upgrade now.
YES
NO
50’
or 15 Meters
Wireless Range
Wireless pairing
2 31
5
+
BASS
BASS
+
BASS
BASS
50’
or 15 Meters
Wireless Range
1
2 3 4 5
+
BASS
BASS
NOTE: Choose analog
OR digital connections
OPTIONAL: For wall mounting instructions, refer to Owners Manual.
3.5-mm to mobile
audio device,
not included
Connecting to source Power connection
Adjust subwoofer loundness
Analog connection to
TV (use for good audio)
Digital connection to
TV (use for best audio)
B
C
*If the soundbar Wireless Status Indicator
alternates between red and blue blinking,
pairing has failed and the process must
be repeated.
Power on, sync to subwoofer
Wireless setting Power connection Wireless status indicatorAdjust subwoofer loundness
Volume
Power
Input
Selector
Wireless
Sync
Attach the Feet Attach feet to subwoofer
for horizontal positioning
TV
Lay your soundbar face down on a soft
surface. Insert feet as shown, press rmly
until you hear a 'click'.
Attach the feet.
Your subwoofer’s LEVEL switch is set to 12 o’clock
to suit average preferences. If desired, adjust up or
down to match sound level of your speakers.
Move switch to “wireless”
setting on subwoofer.
Connect to power source.
Using the Remote or Onboard Interface. Turn Power
ON and repeatedly press Input Selector until you
hear audio. Press the Wireless Sync button to
initiate connection to subwoofer. NOTE: Within
15 seconds plug in subwoofer.
The Wireless Status Indicator on the soundbar
should blink blue for less than 30 seconds
and then go back to normal operation.
Your subwoofer’s LEVEL switch is set to 12 o’clock
to suit average preferences. If desired, adjust up or
down to match sound level of your speakers.
Connect to power source.
C
A
B
E
Feet must be
attached for heat
dissipation clearance
#2 Phillips
(not supplied)
2
*If the soundbar Wireless Status Indicator
alternates between red and blue blinking,
pairing has failed and the process must
be repeated.
Wireless status indicator
The Wireless Status Indicator on the soundbar
should blink blue for less than 30 seconds
and then go back to normal operation.
1
Power on, sync to subwoofer
Volume
Power
Input
Selector
Wireless
Sync
Using the Remote or Onboard Interface. Turn Power
ON and repeatedly press Input Selector until you
hear audio. Press the Wireless Sync button to
initiate connection to subwoofer.
50’
or 15 Meters
Wireless Range
43
Wireless settingPower connection
Move switch to “wireless”
setting on subwoofer.
Connect to power source.
D
Paradigm_Soundtrack_Set-Up_Guide_EN.indd 2 12-10-09 2:33 PM
2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Paradigm Soundtrack System wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Paradigm Soundtrack System

Paradigm Soundtrack System Bedienungsanleitung - Englisch, Französisch, Spanisch - 40 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info