Bedienungsanleitung Parkside IAN 85969 PFS 710 A1 (Seite 40 von 44) (Französisch, Italienisch)

745118

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

40 GB

Preparing for use / Maintenance and cleaning / Service centre

recommended in the operating instructions

could lead to you suﬀering an injury.

Information about saw blades

You can use any saw blade as long as it has the

correct shank ﬁtting -

“ (12.7 mm) universal shaft.

There are diﬀerent saw blades available in various

lengths designed to ensure optimum performance

of every sawing task with your sabre saw.

Note: TPI = teeth per inch / (i.e. per 2.54 cm)

Blade (wood)

Dimensions: 152 x 1.25 mm, 6 TPI

Most suitable for: Sawing construction timber,

chipboard, processed wood boards, plywood.

Also suitable for plunge cuts.

Bi-metal saw blade

Dimensions: 156 mm, 18 TPI

Most suitable for: Sawing sheets, proﬁles and tubes

– ﬂexible and fracture resistant.

Before use

Mounting / replacing

saw blades

Pull the mains plug out of the

mains socket before you carry out any task on the de-

vice. Failure to observe this advice may lead to injury.

j Turn the quick-release chuck

and hold it in

the turned position.

j Press the selected saw blade up to the stop

into the quick-release chuck

. The saw blade

should engage.

j Release the quick-release chuck

. The chuck

must then return to its original position. The saw

blade is now locked in place.

Rotating the hand grip

DANGER OF INJURY! Pull

the mains plug out of the socket before you carry

out any task on the device. The hand grip

can

be rotated by 90° to the right or left. This allows

the ON / OFF switch

to be brought into the most

comfortable position for any working conditions.

j Press the unlocking button

and rotate the

hand grip

to the right or left.

j Make sure the hand grip

engages.

Adjusting the shoe

DANGER OF INJURY! Pull

the mains plug out of the socket before you carry

out any task on the device.

j Adjust the shoe

to suit the cutting depth.

j To do this release the shoe adjustment lever

and place the shoe

in appropriate position.

j Lock the shoe in this position by pulling the

shoe adjustment lever

tight.

Setting the blade speed

The desired blade oscillation speed can be prese-

lected by using the setting wheel

(– = lowest

oscillation speed, + = highest oscillation speed).

The blade speed can also be selected whilst you

are using the device.

Preparing for use

Switching on and oﬀ

When operating the device you can select between

intermittent or continuous operation mode.

To switch on intermittent operation mode:

j Press the ON / OFF switch

To switch oﬀ intermittent operation mode:

j Release the ON / OFF switch

To switch on continuous operation mode:

j Press the ON / OFF switch

and ﬁx it in the

pressed position with the lock button

General safety advice for electrical power tools / Before use / Preparing for use

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 85969 PFS 710 A1 Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Parkside IAN 85969 PFS 710 A1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info