Bedienungsanleitung Parkside IAN 86059 PDS 290 A1 (Seite 31 von 33) (Französisch)

745088

Zoom out

Zoom in

Vorherige Seite

1/33

Nächste Seite

31 GB

Turn the backing plate

in 60° steps

Always pull the mains plug out

of the socket before doing any work on the device.

Turn the backing plate

of the delta sander

in 60° steps until it engages in the desired

position (see Fig. C).

Sanding output and surfaces:

The shape of the delta sander allows you to sand

workpieces even in their diﬃcult to access places,

corners and edges (see Fig. D).

Sanding performance and surface quality depend

on the grade of sanding sheet and the oscillation

speed setting.

Always use sanding sheets with grades that

are suitable for the particular surface you are

sanding. The speed selected should also be

appropriate to the task undertaken.

Advice on use

Switch the device on before placing it against

the workpiece.

Apply light sanding pressure only.

Advance the device at an even rate.

Change sanding sheets at the appropriate time.

Do not work on diﬀerent types of material using

the same sanding sheet (e.g. wood and then

metal). To achieve the best sanding results you

should use unworn, undamaged sanding sheets.

Clean the sanding sheet from time to time with

a vacuum cleaner.

Maintenance and cleaning

Always pull the mains plug out

of the socket before doing any work on the device.

The delta sander is maintenance-free.

Clean the device frequently. This should be done

immediately after you have ﬁnished using it.

For cleaning the housing use a dry cloth only.

Remove any adhering sanding dust with a nar-

row paint brush.

Never any kind of sharp object or petrol, sol

vents

or cleaning agents that might attack plastic. Do

not allow any liquids to enter the inside of the

device.

Always keep the ventilation slots

clear.

Service centre

Have your device re-

paired only by qualified specialist

personnel using original manufacturer

parts only. This will ensure that your device

remains safe to use.

If the plug or mains

lead needs to be replaced, always have

the replacement carried out by the

manufacturer or its service centre. This

will ensure that your device remains safe to use.

Warranty

The warranty for this appliance is for 3

years from the date of purchase. The ap-

pliance has been manufactured with care

and meticulously examined before deliv-

ery. Please retain your receipt as proof of

purchase. In the event of a warranty claim,

please make contact by telephone with our

Service Department. Only in this way can a

ost-free despatch for your goods be assured.

The warranty covers only claims for material and

maufacturing defects, but not for transport damage,

for wearing parts or for damage to fragile compo-

nents, e.g. buttons or batteries. This product is for pri-

vate use only and is not intended for commercial use.

The warranty is void in the case of abusive and im-

proper handling, use of force and internal tamper-

ing not carried out by our authorized service branch.

Your statutory rights are not restricted in any way

by this warranty.

The warranty period will not be extended by repairs

made unter warranty. This applies also to replaced

and repaired parts. Any damage and defects extant

Preparing for use Preparing for use / Maintenance and cleaning / Service centre / Warranty

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside IAN 86059 PDS 290 A1 Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Parkside IAN 86059 PDS 290 A1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info