Bedienungsanleitung Parkside KH 3032 (Seite 8 von 13) (Englisch)

464968

Zoom out

Zoom in

Vorherige Seite

1/13

Nächste Seite

9 GB/IE/CY

d) When not in use always ensure that

electrical power tools are kept out of

reach of children. Do not let anyone use

the device if he or she is not familiar

with it or has not read the instructions

and advice. Electrical power tools are danger-

ous

when they are used by inexperienced people.

e) Look after the device carefully. Check

that moving parts are working prop-

erly and move freely. Check for any

parts that are broken or damaged

enough to detrimentally affect the

functioning of the device. Have dam-

aged parts repaired before you use

the device. Many accidents have their ori-

gins in poorly maintained electrical power

tools.

f) Keep cutting tools clean and sharp.

Carefully maintained cutting tools with sharp

cutting edges are less likely to jam and are

easier to control.

g) Use the electrical power tool, accesso-

ries, inserted tools etc. in accordance

with these instructions and advice, and

the stipulations drawn up for this par-

ticular type of device. In doing this,

take into account the working condi-

tions and the task in hand. The use of

electrical power tools for purposes other than

those intended can lead to dangerous situations.

Safety advice for

belt sanders

DANGER OF FIRE FROM FLYING SPARKS!

Sanding metal creates ﬂying sparks. For this

reason, always make sure that nobody is placed

in any danger and that there are no inﬂammable

materials near the working area.

J When undertaking prolonged sanding of

wood, and in particular when working on ma-

terials that give rise to dusts that are hazardous

to health, the sander must be connected to a

suitable external dust extraction device.

J Ensure that there is adequate ventilation when

working on plastic, paint, varnish etc.

J The belt sander is designed for the dry sanding

of large surfaces of wood, plastic, metal and

plaster and painted surfaces. The device is to

be used for dry sanding only.

J Do not sand materials containing asbestos.

Asbestos is a known carcinogen.

WARNING!

POISONOUS DUSTS!

Sanding paints containing lead, some types of

wood and metal for example may give rise to

hazardous or poisonous dusts and represents a

risk to the health of the person operating the

device and to anyone near the work area.

Wear safety glasses and a dust

protection mask!

J Securely support the workpiece. Use clamps or

a vice to grip the workpiece ﬁrmly. This is much

safer than holding it with your hand.

J Never support yourself by placing your hands

near or in front of the device or the workpiece

surface. A slip can result in injury.

J If a dangerous situation arises, pull the mains

plug immediately out of the mains socket.

J Always work with the mains lead leading

away from the rear of the device.

J Avoid contact with the moving sanding belt.

J Do not work on moistened materials or damp

surfaces.

J Always switch on the device before placing it

against the workpiece. After sanding, lift the de-

vice from the workpiece before switching it oﬀ.

J When working always hold the device securely

with both hands (see Fig. E). Always keep prop-

er footing and balance.

J Switch the device oﬀ and allow it to come to

a complete standstill before you put it down.

J When taking a break from your work, before

carrying out any tasks on the device itself (e.g.

changing the sanding belt) and when you are

not using the device, always pull the mains

plug out of the mains socket.

Preparing for use

Take note of the mains voltage. The mains voltage

at the mains socket must match that shown on the

rating plate on the device. Devices marked with

230 V can also be operated at 220 V.

General safety advice for electrical power tools / Preparing for use

30176_Bandschleifer_Content_LB6.indd 9 03.04.09 08:58

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside KH 3032 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Parkside KH 3032

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info