Bedienungsanleitung Parkside PBM 450 C2 - IAN 307054 (Seite 8 von 50) (Englisch)

687487

Zoom out

Zoom in

Vorherige Seite

1/50

Nächste Seite

Engine .............. 4-stroke B&S 450 E Series

Engine size .......................... 125 cm

(cc)

Power input ................ 1.82 kW (2,47 HP)

Engine speed (n

)..................... 2900 min

-1

Blade torque ................................. 45 Nm

Petrol tank volume ............................ 0.8 l

Octane rating ................................ 95-98

Engine oil tank volume ...................... 0.47l

Spark plug ................ Champion QC12YC

Cutting circle ............................... ø 42 cm

Cutting height... 5-stage, 25-34-46-60-75 mm

Grass collection box volume ............... 55 l

Weight (inc. collection box)

........... 25.2 kg

Sound pressure level

PA) ................ 81.7 dB(A); K=3.0 dB(A)

Sound power le

vel (L

WA )

measured .......94.5 dB(A); K=1.80 dB(A)

guaranteed ............................ 96 dB(A)

Vibration at the handle

h)............ 6,67/5,69 m/s

; K=1.5 m/s

Noise and vibration values have been

determined according to the standards and

regulations mentioned in the declaration of

conformity.

Technical and optical changes can be

carried out in the course of further develop-

ment without notice. All dimensions, refer-

ences and information of this instruction

manual are therefore without guarantee.

Legal claims, which are made on the basis

of the instruction manual, cannot thus be

considered as valid.

The stated vibration emission value was

measured

in accordance with a standard

testing procedure and may be used to com-

pare one power tool to another.

The stated vibration emission value may

also be used for a preliminary exposure

assessment.

Warning:

The vibration emission value may differ

during actual use of the power tool

from the stated value depending on

the manner in which the power tool

is used.

Safety precautions aimed at protecting

the user should be based on estimated

exposure under actual usage conditions.

All parts of the operating cycle are to be

considered, including, for example,

times during which the power tool is

turned off and times when the tool is

turned on but is running idle.

As a result, the vibration load over the

entire working period is significantly

reduced.

Reduce the vibration load over the

entire working period by additional

safety measures such as:

- the timely maintenance of machine

and accessories, especially the blade

- interruption of the work process by

pauses

- keeping hands warm.

Symbols and icons

Symbols on the device

Attention!

Read the instruction manual

Risk of injury from parts being

Keep bystanders away from the

equipment

Risk of injury from sharp blades

Keep feet and hands away

Caution – toxic fumes!

Do not operate the equipment in

enclosed areas

Caut

Do not smoke and keep away from

heat sources

GB IE NI

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PBM 450 C2 - IAN 307054 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Parkside PBM 450 C2 - IAN 307054

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info