679111
5
Zoom out
Zoom in
Vorherige Seite
1/24
Nächste Seite
PNS 300 A1
2 
GB
IE
2-SPEED CORDED POWER DRILL
PNS 300 A1
Introduction
Congratulations on the purchase of your new appli-
ance. You have chosen a high-quality product. The
operating instructions are part of this product. They
contain important information about safety, usage
and disposal. Before using the product, please
familiarise yourself with all operating and safety
instructions. Use the product only as described and
for the range of applications specified. Please also
pass these operating instructions on to any future
owner.
Intended use
This appliance is intended for screwing and un-
screwing screws and drilling into wood, metals
and plastics.
Use this product only as described and for the
areas of applications specified. The appliance is
not intended for commercial use. Any other usage
or modification of the appliance is deemed to be
improper and carries a significant risk of accidents.
The manufacturer accepts no responsibility for
damage attributable to misuse.
Features
Speed selector switch
Cover for carbon brushes
Rotation direction switch/lock
Locking button
ON/OFF switch / speed control
Torque selection ring
Bit holder
Chuck ring
Chuck
Bit
Package contents
1 2-SPEED CORDED POWER DRILL PNS 300 A1
1 bit (50 mm)
1 set of operating instructions
Technical data
Rated power
consumption: 300 W
Rated voltage: 230 V ∼ 50 Hz
(AC)
Gearbox: 2-speed gearbox
Rated idle speed: 1st gear: n
0
0–400 rpm
2nd gear: n
0
0–1600 rpm
Max. torque: 40 Nm
Torque levels: 1–22 + 1 drill setting
Chuck capacity:
: max. Ø 10 mm
Max. drill diameter: 25 mm for wood
10 mm for steel
Protection class: II /
(double insulation)
Noise emission value:
Noise measurement value determined in accordance
with EN 60745. The A-rated noise level of the
power tool is typically as follows:
Sound pressure level: L
PA
= 81.2 dB (A)
Uncertainty K: K
PA
= 3 dB
Sound power level: L
WA
= 92.2 dB (A)
Uncertainty K: K
WA
= 3 dB
Vibration emission value:
Total vibration values (vector total of three direc-
tions) determined in accordance with EN 60745:
Drilling in metal:
a
h,D
= 3.758 m/s
2
Uncertainty K = 1.5 m/s
2
Idle speed/max. speed:
a
h
= 0.697 m/s
2
Uncertainty K = 1.5 m/s
2
Wear hearing protection!
5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Parkside PNS 300 A1 - IAN 302394 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Parkside PNS 300 A1 - IAN 302394

Parkside PNS 300 A1 - IAN 302394 Bedienungsanleitung - Deutsch, Holländisch, Französisch - 38 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info