576684
5
Zoom out
Zoom in
Vorherige Seite
1/86
Nächste Seite
2
PSBSA 18-Li A1
GB
IE
CORDLESS HAMMER DRILL
PSBSA 18-Li A1
Introduction
Congratulations on the purchase of your
new appliance. You have selected a high
quality product. The operating instructions
are part of this product. They contain
important information on safety, usage
and disposal. Before using the product, familiarise
yourself with all operating and safety instructions.
Use the product only as described and for the
areas of application specifi ed. Please also pass
these operating instructions on to any future
owner(s).
Intended use
This appliance is intended for installing and re-
moving screws as well as drilling in wood, metal,
ceramic and plastic and impact drilling in bricks
and masonry. It is not suitable for impact drilling
in natural stone such as granite. The light on this
appliance is intended to illuminate the immediate
work area of the appliance.
Use this product only as described and for the
areas of applications specifi ed. The appliance is
not meant for commercial use. Any other usage
of or modifi cation to the appliance is deemed to
be improper usage and carries the risk of serious
personal injury. The manufacturer accepts no re-
sponsibility for damage(s) resulting from improper
usage.
Features
Speed selector
Rotational direction switch / Lock
ON/OFF switch / Speed control
Bit holder
Battery charge level button
Battery display LED
Battery pack
Release button for battery pack
LED work light
Additional handle
Chuck
Torque selection ring
Rapid charger
Red charge control LED
Green charge control LED
Package contents
1 Cordless hammer drill PSBSA 18-Li A1
1 Rapid charger PLG 18 A1
1 Battery pack
1 Additional handle
1 User manual
Technical data
Cordless hammer drill: PSBSA 18-Li A1
Rated voltage: 18 V
Drive: 2 speed drive
Idle speed: 1st gear: n
0
0–440 rpm
2nd gear: n
0
0–1650 rpm
Hammer frequency: 0–26400 /min
Max. torque: 40 Nm
Torque stages: –20 + 1 drill setting /
+ 1 hammer drill setting
Chuck clamping range: max. 13 mm
Recommended hole
diameters: max. 13 mm for steel
max. 30 mm for wood
max. 15 mm for bricks
Battery: PAP 18 A1
Type: LITHIUM ION
Rated voltage: 18 V
Capacity: 1.5 Ah
Rapid charger: PLG 18 A1
INPUT:
Rated voltage: 230–240 V
~
, 50 Hz
Power consumption: 40 W
OUTPUT:
Rated voltage: 18 V
Charging power: 1.8 A
Charging time: approx. 60 min
Fuse (internal): 2 A
T2A
Protection class: II /
IB_102868_PSBSA18-LiA1_LB3.indb 2 09.10.14 14:18
5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Parkside PSBSA 18-Li A1 - IAN 102868 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info