Bedienungsanleitung Parkside PZKS 1500 B2 - IAN 280657 (Seite 103 von 106) (Deutsch, Englisch, Holländisch, Französisch)

706372

103

Zoom out

Zoom in

Vorherige Seite

1/106

Nächste Seite

GB / IE / NI

or if the spring or contact wire are burned

or damaged, it is necessary to replace both

brushes. If the brushes are found to be

usable following removal, it is possible to

reinstall them.

11. Storage

Store the device and its accessories in

a dark, dry and frost-proof place that is

inaccessible to children. The optimum

storage temperature is between 5 and 30°C.

Store the electrical tool in its original

packaging.

Cover the electrical tool in order to protect it

from dust and moisture.

Store the operating manual with the electrical

tool.

12. Electrical connection

The electrical motor installed is connected

and ready for operation. The connection

complies with the applicable VDE and DIN

provisions.

The customer‘s mains connection as well as

the extension cable used must also comply

with these regulations.

•Theproductmeetstherequirementsof

EN 61000-3-3 and is subject to special

connection conditions. This means that

use of the product at any freely selectable

connection point is not allowed.

•Givenunfavorableconditionsinthe

power supply the product can cause the

voltage to fluctuate temporarily.

•Theproductisexclusivelyintendedfor

use at connection points that have a

continuous current-carrying capacity of at

least 100 A per phase.

•Astheuser,youarerequiredtoensure,

in consultation with your electric power

company if necessary, that the connection

point at which you wish to oper-ate the

product meets the specified requirements.

Damaged electrical connection cable

The insulation on electrical connection cables

is often damaged.

This may have the following causes:

•Passagepoints,whereconnectioncables

are passed through windows or doors.

•Kinkswheretheconnectioncablehas

been improperly fastened or routed.

•Placeswheretheconnectioncableshave

been cut due to being driven over.

•Insulationdamageduetobeingripped

out of the wall outlet.

•Cracksduetotheinsulationageing.Such

damaged electrical connection cables

must not be used and are life-threatening

due to the insulation damage.

Check the electrical connection cables

for damage regularly. Make sure that the

connection cable does not hang on the

power network during the inspection.

Electrical connection cables must comply

with the applicable VDE and DIN provisions.

Only use connection cables with the marking

"H05VV-F".

The printing of the type designation on the

connection cable is mandatory.

AC motor

•Themainsvoltagemustbe230V~

•Extensioncablesupto25mlongmust

have a cross-section of 1.5 mm².

Connections and repairs of electrical

equipment may only be carried out by an

electrician.

Please provide the following information

in the event of any enquiries:

•Typeofcurrentforthemotor

•Machinedata-typeplate

Storage/Electrical connection

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Parkside PZKS 1500 B2 - IAN 280657 Seite 103

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info