532596
54
Zoom out
Zoom in
Vorherige Seite
1/114
Nächste Seite
ENGLISH
53
Audio and video momentarily pause dur-
ing reading of the disc.
The disc is dirty or any scratch.
Check the TV system setting, switch PAL/NT-
SC TV system in setup menu.
Try to reset the unit and press STANDBY/ON for
5 seconds, and then press this button again.
The unit is on with start logo and menu but
has no image from the disc.
The disc is dirty or any scratch.
Try to reset the unit and press STANDBY/ON,
wait for 5 seconds, and then press this button
again.
The unit freezes during reading of CD-R/
DVD-R disc.
Reset the unit. When you see Loading on the
screen, press OPEN/CLOSE to take out the
disc, clean the disc and try it again.
If the unit freezes again, the disc may have
some contents the unit can't support, please
stop playing the disc in this unit.
TV SCREEN AND VIDEO
The images from this unit do not appear
on the television. Picture is distorted.
Make sure that the television is connected to
the VIDEO OUT terminal or HDMI AV OUT ter-
minal on this unit.
Make sure that the television input setting (e.g.,
VIDEO 1) is correct.
The device is likely to enter screen saver sta-
tus.
Try to reset the unit and press STANDBY/ON for
5 seconds, and then press this button again.
Video is not output in high definition. High definition video cannot be output through
the VIDEO OUT.
Confirm that the HDMI Resolution in the Setup
menu is set properly.
The 4:3 aspect ratio picture expands left
and right.
Screen size is wrong.
Use the television to change the aspect. Refer
to the television operating instructions.
When using a component video cable, set TV
Aspect to 4:3 Pan and Scan.
There is no apparent change in picture
quality when adjusted with the Video menu
in the on-screen menu.
The eect is less perceivable with some types
of video.
When it is playing BD-LIVE disc, Video
output is a black screen.
Select ‚Erase Blue-ray storage‘ in the menu.
Close menu and restart.
Please check the internet is ok or not. Some
discs need the support of internet.
Please check the plug of the connecting cable;
if loose, insert it again.
54

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Peaq PBR110 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info