651193
43
Zoom out
Zoom in
Vorherige Seite
1/122
Nächste Seite
43
ENGLISH
Internet-Radio Configuration
There are two ways to connect the radio to
the internet using an access point:
•Wireless in WLAN-Mode
The WiFi-antenna of the radio receives
your DSL router signals.
•With cable using the radio’s LAN con-
nection in LAN-Mode
provided an ethernet network is available.
WLAN-MODE CONFIGURATION
If you have a wireless network, the WLAN
mode is the direct way to connect your ra-
dio to the Internet:
1. Simply switch the radio on and, as a
cable-free network client, it automati-
cally searches all available APs (Access
Points).
2. When switching on for the first time,
you must confirm the AP and perhaps
enter the key. For doing so please fol-
low instructions of below chapters.
After that, the radio will always access
this AP. If the AP can no longer be
found, it will be registered accordingly.
LAN CONFIGURATION
If you do not have a wireless network but
do have a cabled network, you can con-
nect the Internet radio with a network.
1. Switch the radio o.
2. Connect an Ethernet cable to the LAN
socket. Once switched on and choose
wired. The radio will automatically be
recognized as a cable client.
WLAN-REGION AND WLAN-NETWORK
Select the WLAN-Region in which you are
located. The device then looks for available
wireless networks. If a wireless network is
not found, the device shows the notifica-
tions <No WLAN network found>. Please
check in this case whether your router and
WLAN are switched on.
Note
Make sure that the DHCP-server of your
router (Access Point) is activated. Other-
wise, the WLAN connection must be con-
figured manually. The WLAN should send
out the SSID. If the SSID is not sent out,
you must configure the WLAN manually.
•Select the network from which you want
to operate Internet radio.
PUBLIC NETWORK CONNECTION
Select the appropriate WLAN-network
by clicking on the entry of the network’s
name. The connection procedure takes
place automatically.
Note
In the Systems settings > Setup wizard,
you can manually configure the network.
IM_PDR220_160303_A_V04_HR.indb 43 3/3/16 11:19 AM
43

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Peaq PDR220 - Internet Radio wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info