506093
55
Zoom out
Zoom in
Vorherige Seite
1/61
Nächste Seite
ADSL2/2+ Modem Router
www.phicomm.com
50
Appendix A: Troubleshooting
Appendix A: Troubleshooting
1. How do I restore my Modem Routers configuration to factory default settings?
With the router powered on, press the Reset button on the rear panel, keep holding it for about 5
seconds then release it.
2. Why I cannot login the Modem Router’s web management page?
Make sure the computer goes into the LAN port of the router.
Check the computer’s IP address; make sure the IP address is obtained automatically, for
details please refer to the section of Configure the Computers IP Address in this manual.
Make sure you put 192.168.1.1 into the address bar, not the search bar.
Check your web browser; make sure the Proxy server is unchecked. Take Internet Explorer as
an example, go to Tools>Internet Options>Connections>LAN Settings, uncheck Use a
proxy server for your LAN.
If it tells you the username or password is error, and you cannot remember the new one,
please reset router by pressing reset button for at least 5 seconds, and then try to login with
default username and password (admin/admin).
3. What can I do if I forgot my login password for the Modem Routers web management
page 192.168.1.1?
Restore the Modem Router to its factory default settings, please refer to question 1.
Use the default username and password: admin, admin.
Reconfigure the Modem Router after you reset it successfully.
4. What can I do if I cannot access the Internet?
Make sure all the connectors are connected properly, including the telephone line, Ethernet
cables and power adapter.
Try to restart your Modem Router and computer.
Try to login to the web management page of the Modem Router. If you can, please check
the status of DSL light on the front panel of the Modem Router:
a) DSL light is solid on, please refer to question 5.
b) DSL light is blinking or off, please contact with your Internet Service Provider to check your
ADSL service.
If you cannot open the Modem Routers web management page, please try to reset the Modem
Router, refer to question 1.
5. What can I do if the DSL light is solid on, but the Internet light is off?
Log in the Modem Routers web management page 192.168.1.1, consult your ISP and make sure
55

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Phicomm FD-222 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info