Bedienungsanleitung Philco PWD14S (Seite 17 von 21) (Englisch)

492066

Zoom out

Zoom in

Vorherige Seite

1/21

Nächste Seite

Running a Dry Cycle

This section summarises the main points when completing a drying cycle. For detailed

explanations of drying programmes, please refer to the relevant section in this manual.

Sorting the laundry

Once the wash cycle has ﬁnished, make sure the laundry does not exceed the

recommended drying weight (see Programme Guide for details). If you have ﬁlled the

washing machine to the maximum level you will need to remove some of the laundry

before starting the drying stage. It is advisable to reduce the load size further if the

item is bulky or absorbent e.g. towels. Please refer to the Drying Advice section for a

list of items that should not be tumble dried.

Selecting the drying programme

Refer to the Programme Guide to choose the most appropriate drying cycle for your

laundry, with the correct heat setting for the fabrics type (high heat for cottons, low

heat for synthetics). Turn the programme dial to the appropriate heat setting. Press the

Drying Selection button until the required programme is selected (refer to the Dry

Options table).

Starting the drying cycle

Once the programme option is illuminated, press the Start Pause button to begin the

cycle. The Door Locked indicator and KG Mode lights will illuminate. After a few

seconds the cycle will begin, highlighting the time remaining for the cycle based on a

full dry load. During the cycle the appliance will assess the load then update the time

to suit the actual load size and dampness of the fabrics. The double glazed door of

this appliance provides protection against the high heat created by the tumble drying

action.

When the programme has ﬁnished

We recommend that you let the Cool Down period of the drying cycle complete before

removing the laundry, as the laundry would be too hot to handle without this phase.

Once the drying cycle has ﬁnished, the word END will be displayed on the digital

display. Wait 2 minutes until the Door Locked indicator turns off. Open the door and

remove the laundry. Turn the programme dial to the OFF position.

Selecting a straight through wash & dry cycle

If you wish to wash and dry a load without stopping in between wash and dry cycles,

make sure the wash load does not exceed the maximum dry weight (see Programme

Guide for details). Once the detergent has been added and the wash programme and

options selected, you should then choose the drying cycle before pressing the Start

Pause button. The appropriate heat setting is automatically selected (see Programme

Guide for details).

Estimated drying times of Sensor Dry programmes

Programme

Extra Dry

Store Dry

Iron Dry

Min 1 kg

From

30 mins

From

30 mins

From

30 mins

Cottons

Min 1 kg

From

30 mins

From

30 mins

From

30 mins

Max 3 kg

Up to

170 mins

Up to

150 mins

Up to

80 mins

Synthetics / Acrylics

Max 4 kg

Up to

230 mins

Up to

220 mins

Up to

170 mins

The time remaining shown on the digital display will show the time remaining for a full

load. However, this will be corrected during the cycle once the appliance assesses the

weight and dampness of the laundry.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philco PWD14S Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info