140158
44
Zoom out
Zoom in
Vorherige Seite
1/47
Nächste Seite
44
TROUBLESHOOTING TIPS
No Power
Check the TV power cord. Unplug the TV, wait 10 seconds,
then reinsert the plug into the outlet and push the POWER
button again.
Check that the outlet is not on a wall switch.
Be sure the fuse is not blown on the AC power strip, if one is
being used.
No Picture
Check antenna/cable connections. Are they properly secured
to the TV's ANT 75 plug?
Check the TUNER MODE control for the correct tuner set-
ting.
•Try running the Auto Program feature to find all available
channels.
Press the SOURCE button on the remote to make sure the
correct signal source is selected.
If using an accessory device, be sure that it is functioning
properly.
If in PC Mode, a video signal MUST BE present or the TV
will turn off.
No Sound
Check the VOLUME buttons.
Check the MUTE button on the remote control.
If you’re attempting to hook up auxiliary equipment, check
the audio jack connections.
TV Only Produces MONO Sound
If using a cable box with RF only type connections, the signal
coming from the cable box will be produced in MONO only.
Check Sound control setting. Change setting to Stereo.
Remote Does Not Work
Check the batteries. If necessary, replace them with AA
Heavy Duty (Zinc Chloride) or Alkaline batteries.
Clean the remote control and the remote control sensor win-
dow on the TV.
Check the TV power cord. Unplug the TV, wait 10 seconds,
then reinsert the plug into the outlet and push the POWER
button again.
Be sure the fuse is not blown on the AC power strip, if one is
being used.
Check to be sure the TV outlet is not on a wall switch.
Be sure that the remote is in the correct operating mode.
Be sure the remote is pointed at the Remote Sensor Window
on the TV. See page 1 of the Quick Use Guide for details.
TV Displays Wrong Channel or No Channels Above 13
Repeat channel selection.
Add the desired channel numbers (using the CHANNEL
EDIT control) into the TV’s memory.
Check to be sure the TUNER MODES are set to the CABLE
option and run the Auto Program feature to find all available
channels.
• If S-VHS is disconnected, picture color will become faint.
To restore picture color, press the CH +/– button on the
remote control and do a channel up followed by a
channel down.
S-VHS color becomes faint
44

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Philips 23 pf 9966 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info