Bedienungsanleitung Philips 231S4LS (Seite 50 von 52) (Englisch)

514597

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

10. Troubleshooting & FAQs

• In the Windows Start Menu, select Settings/

Control Panel. In the Control Panel

Window, select the Display icon. Inside the

Display Control Panel, select the 'Settings'

tab. Under the setting tab, in box labelled

'desktop area', move the sidebar to 1920 x

1080 pixels.

• Open 'Advanced Properties' and set the

Refresh Rate to 60 Hz, then click OK.

• Restart your computer and repeat step 2

and 3 to verify that your PC is set at 1920

x 1080 @ 60 Hz.

• Shut down your computer, disconnect your

old monitor and reconnect your Philips

LCD monitor.

• Turn on your monitor and then turn on

your PC.

Q2: What is the recommended refresh

rate for LCD monitor?

Ans.: Recommended refresh rate in LCD

monitors is 60 Hz, In case of any

disturbance on screen, you can set it

up to 75 Hz to see if that removes the

disturbance.

Q3: Whatarethe.infand.icmlesonthe

CD-ROM? How do I install the drivers

(.inf and .icm)?

Ans.: These are the driver les for your

monitor. Follow the instructions in your

user manual to install the drivers. Your

computer may ask you for monitor

drivers (.inf and .icm les) or a driver

disk when you rst install your monitor.

Follow the instructions to insert the

companion CD-ROM included in this

package. Monitor drivers (.inf and .icm

les) will be installed automatically.

Q4: How do I adjust the resolution?

Ans.: Your video card/graphic driver and

monitor together determine the

available resolutions. You can select the

desired resolution under Windows

Control Panel with the "Display

properties".

Q5: What if I get lost when I am making

monitor adjustments via OSD?

Ans.: Simply press the OK button, then select

'Reset' to recall all of the original factory

settings.

Q6: Is the LCD screen resistant to

scratches?

Ans.: In general it is recommended that

the panel surface is not subjected to

excessive shocks and is protected from

sharp or blunt objects. When handling

the monitor, make sure that there is

no pressure or force applied to the

panel surface side. This may affect your

warranty conditions.

Q7: How should I clean the LCD surface?

Ans.: For normal cleaning, use a clean, soft

cloth. For extensive cleaning, please use

isopropyl alcohol. Do not use other

solvents such as ethyl alcohol, ethanol,

acetone, hexane, etc.

Q8: Can I change the color setting of my

monitor?

Ans.: Yes, you can change your color setting

through OSD control as the following

procedures,

• Press "OK" to show the OSD (On Screen

Display) menu

• Press "Down Arrow" to select the option

"Color" then press "OK" to enter color

setting, there are three settings as below.

1. Color Temperature: The six settings are

5000K, 6500K, 7500K, 8200K, 9300K

and 11500K. With settings in the 5000K

range the panel appears "warm, with a

red-white color tone", while a 11500K

temperature yields "cool, bluewhite

toning".

2. sRGB: This is a standard setting for

ensuring correct exchange of colors

between different device (e.g. digital

cameras, monitors, printers, scanners,

etc).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 231S4LS Seite 50

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 231S4LS

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info