Bedienungsanleitung Philips 242E1 (Seite 27 von 29) (Englisch)

751337

Zoom out

Zoom in

Vorherige Seite

1/29

Nächste Seite

8. Troubleshooting & FAQs

• Open 'Advanced Properties' and set

the Refresh Rate to 60Hz, then click

OK.

• Restart your computer and repeat step

2 and 3 to verify that your PC is set at

1920×1080.

• Shut down your computer, disconnect

your old monitor and reconnect your

Philips LCD monitor.

• Turn on your monitor and then turn on

your PC.

Q2: What is the recommended refresh

rate for LCD monitor?

Ans.: Recommended refresh rate in LCD

monitors is 60Hz, In case of any

disturbance on screen, you can set

it up to 75Hz to see if that removes

the disturbance.

Q3: What are the .inf and .icm files on

the CD-ROM? How do I install the

drivers (.inf and .icm)?

Ans.: These are the driver files for your

monitor. Follow the instructions

in your user manual to install the

drivers. Your computer may ask

you for monitor drivers (.inf and

.icm files) or a driver disk when

you first install your monitor.

Follow the instructions to insert

the companion CD-ROM included

in this package. Monitor drivers

(.inf and .icm files) will be installed

automatically.

Q4: How do I adjust the resolution?

Ans.: Your video card/graphic driver

and monitor together determine

the available resolutions. You can

select the desired resolution under

Windows® Control Panel with the

"Display properties".

Q5: What if I get lost when I am making

monitor adjustments via OSD?

Ans.: Simply press the button,

then select ‘Setup’ >’Reset’ to recall

all of the original factory settings.

Q6: Is the LCD screen resistant to

scratches?

Ans.: In general it is recommended

that the panel surface is not

subjected to excessive shocks

and is protected from sharp or

blunt objects. When handling the

monitor, make sure that there is

no pressure or force applied to

the panel surface side. This may

affect your warranty conditions.

Q7: How should I clean the LCD

surface?

Ans.: For normal cleaning, use a clean,

soft cloth. For extensive cleaning,

please use isopropyl alcohol. Do

not use other solvents such as

ethyl alcohol, ethanol, acetone,

hexane, etc.

Q8: Can I change the color setting of

my monitor?

Ans.: Yes, you can change your color

setting through OSD control as

the following procedures,

• Press "OK" to show the OSD (On

Screen Display) menu

• Press "Down Arrow" to select the

option "Color" then press "OK" to

enter color setting, there are three

settings as below.

1. Color Temperature: With settings

in the 6500K range the panel

appears "warm, with a red-

white color tone", while a 9300K

temperature yields "cool, blue-

white toning".

2. sRGB; this is a standard setting

for ensuring correct exchange of

colors between different device

(e.g. digital cameras, monitors,

printers, scanners, etc)

3. User Define; the user can choose

his/her preference color setting

by adjusting red, green blue color.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 242E1 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 242E1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info