Bedienungsanleitung Philips-Avent SCD921 (Seite 37 von 42) (Englisch)

776075

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

- 37 -

NOISE/SOUND

Problem Solution

Why don't I hear a

sound?Why can't I hear

my baby cry?

Perhaps the parent unit is muted� Unmute it by pressing the top part of

the control button and adjust the volume�

Perhaps you have muted the app� Unmute it by tapping the mute icon on

the video screen�

The sensitivity is set too low� Increase the sensitivity in the parent unit's

menu or the app to a higher level�

The baby unit may be too far away from your baby� Make sure the

baby unit is not further than 1�5 meters / 5 feet away from your baby

for optimal sound detection� Closer than 1 meter /3�5 feet increases

strangulation hazard�

Why does the app/parent

unit react too quickly to

other sounds than my

baby makes?

The sensitivity level may be set too high� When your baby makes soft

sounds, the sensitivity has to be higher. However, the noisier is nursery

room is, the lower the sensitivity level can be set. You can change the

sensitivity of your baby monitor on the parent unit's menu�

OPERATING TIME / RANGE

Problem Solution

Why does my baby

monitor manage a much

smaller distance than

specied in this user

manual?

The specied operating range between the parent unit and baby unit

is up to 400 meters/ 1312 feet, and it's only valid outdoors in open

air and in the line of sight� Depending on the surroundings and other

disturbing factors, the operating range may be smaller (see the table in

'Operating range' chapter). Inside your house, the operating range is up

to 50meters/165 feet, which is also limited by the number and type of

walls and/or ceilings between the parent unit and the baby unit�

VIDEO DISPLAY

Problem Solution

Why do I get interference

on the parent unit? Why

does the video display on

the parent unit icker?

Why does the parent unit

make a buzzing sound?

Interference may occur when the parent unit is out of range of the baby

unit� If there are too many walls or ceilings between the parent unit and

the baby unit� Or when other 2�4 GHz wireless devices are switched on

(e.g. microwave, Wi-Fi router).

Put the parent unit in a dierent place, closer to the baby unit, or switch

o other wireless devices.

Why isn't the image on

the video display clear?

Perhaps the lens of the baby unit is dirty� Clean the lens with a dry cloth�

The video resolution will automatically adjust when the parent unit is

moving too far away from the baby unit� Move the parent unit closer to

the baby unit�

Why do I get black and

white images instead of

colour ones?

The baby monitor has switched to night vision mode because the room

where the baby monitor is placed is dark�

If there is enough light in the room, the light sensor on the baby monitor

may be covered or dirty. Make sure that this sensor is fully exposed to the

light in the room�

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips-Avent SCD921 Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips-Avent SCD921

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info