Bedienungsanleitung Philips AW3000 (Seite 28 von 39) (Englisch)

545341

Zoom out

Zoom in

Vorherige Seite

1/39

Nächste Seite

26 EN

8 Troubleshooting

Warning

• Never remove the casing of this apparatus.

Tokeepthewarrantyvalid,nevertrytorepair

the system yourself.

If you encounter problems when using this

apparatus,checkthefollowingpointsbefore

requestingservice.Iftheproblemremains

unsolved,gotothePhilipswebsite(www.

philips.com/welcome). When you contact

Philips,ensurethattheapparatusisnearby

and the model number and serial number are

available.

No power

• Make sure that the AC power plug of the

device is connected properly.

• Make sure that there is power at the AC

outlet.

• Check whether the device is in Eco

standby mode (see 'Connect power and

switch on' on page 7).

No sound

• Check whether the device is muted. The

power/statusindicatorasheswhitewhen

the device is muted. Adjust volume on

the Philips AirStudio app or on AW3000

directly.

• Ifyouhavechosenthewiredconnection,

check whether the Ethernet cable has

been connected properly and securely

(see 'Option 4: Set up wired connection

through an Ethernet cable' on page 15).

• Check the Wi-Fi network connection.

Set up the network again if needed (see

'Connect AW3000 to your home Wi-Fi

network' on page 9).

• If the audio source is an external audio

player,adjustvolumeontheaudioplayer

directly.

No response from the device

• RestartAW3000,andthenset up the

Wi-Fi network for AW3000 again (see

'Option 1: Set up wireless connection to a

non-WPS router through an iOS device'

on page 9).

• Disconnect and reconnect the AC power

plug,andthenswitchonthedeviceagain.

Wi-Fi network connection failed

• This device does not support the WPS-

PIN method.

• Enable SSID broadcast on the Wi-Fi router.

• Keep away from potential sources of

interferencewhichmayaffectWi-Fisignal,

such as microwave ovens.

• Make sure that the SSID name of your

home router consists of alphanumeric

characters,withnospaceorspecial

characterslike%/#/*/#inserted.The

network password should not consist of

#/:/;/'.

• If you choose to rename your AW3000

manually on the Philips AirStudioapp,do

not use special characters or symbols.

• ForsomenewtypesofWi-Firouters,a

network name (SSID) may be created

automatically when you use WPS for

connection. Always change the default

network name (SSID) to a simple one that

consistsofalphanumericalcharacters,and

also change the Wi-Fi security mode to

secure your network.

Wired network connection failed

• Ifyouhavetriedwirelessconnection,

beforesetupofwiredconnection,you

need to reset the wireless Hi-Fi speaker.

Follow the procedures below to reset the

device:

1 Unplug the power cord.

2 Hold the numeric key 1 and plug the

power cord again.

» Thepower/statusindicatorashes

amber,thenturnssolidamber,andafter

awhilestartstoashamberagain.

3 Release the numeric key 1.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips AW3000 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips AW3000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info