Bedienungsanleitung Philips bdl4631v (Seite 34 von 34) (Englisch)

214002

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

User Manual BDL3231/BDL4231

8.2 TROUBLESHOOTING

Symptom Possible Cause Remedy

No picture is displayed

Interference displayed on the

monitor or audible noise is

heard

Color is abnormal

Picture is distorted with

abnormal patterns

Display image doesn’t ﬁll up

the full size of the screen

Can hear sound, but no

picture

Can see picture but no sound

is heard

Some picture elements do

not light up

After-Images can still be seen

on the monitor after the

monitor is powered off.

(Examples of still pictures

include logos, video games,

computer images, and images

displayed in 4:3 normal mode)

1. The power cord is disconnected.

2. The main power switch on the back of the

monitor is not switched on.

3. The selected input has no connection.

4. The monitor is in standby mode in VGA

mode.

Caused by surrounding electrical appliances,

cars/motor cycles or ﬂuorescent lights.

The signal cable is not connected properly.

1. The signal cable is not connected properly.

2. The input signal is beyond the capabilities of

the monitor.

If under AV, CARD AV, or Component with

480i input, the 4:3 wide mode is switched on.

Improperly connected source signal cable.

1. Improperly connected source signal cable.

2. Volume is turned all the way down.

3. MUTE is turned on.

4. No external speaker connected, and

speaker switch Int./Ext. is on the Ext.

position (Full position).

Some pixels of the display may not turn on.

A still picture is displayed for an over

extended period of time.

1. Plug in the power cord.

2. Make sure the power switch is switched on.

3. Connect a signal connection to the monitor.

Move the monitor to another location to see is the

interference is reduced.

Make sure that the signal cable is attached ﬁrmly to the

back of the monitor.

1. Make sure that the signal cable is attached ﬁrmly.

2. Check the video signal source to see if it is beyond

the range of the monitor. Please verify its

speciﬁcations with this monitor’s speciﬁcation

section.

Select VIDEO ADJUSTMENT function in SETUP menu

to ﬁne tune display geometry and time frequency

parameter.

Make sure that both video inputs and sound inputs are

correctly connected.

1. Make sure that both video inputs and sound inputs

are correctly connected.

2. Use VOL +/- button to hear sound.

3. Switch MUTE off by using the MUTE button.

4. Press speaker switch Int./Ext. to the right position

(Half position for Int.).

This monitor is manufactured using an extremely high

level of precision technology: however, sometimes some

pixels of the monitor may not display.

This is not a malfunction. Please see the enclosed

warranty card for more information.

Do not allow a still image to be displayed for an

extended period of time as this can cause a permanent

after-image to remain on the monitor.

RETURN TO THE CONTENTS

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips bdl4631v Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info