Zoom out
Zoom in
Vorherige Seite
1/14
Nächste Seite
www.philips.com/support
User manual
Always there to help you
Register your product and get support at
BT7500B
Question?
Contact
Philips
1

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Inhalt der Seiten


  • Page 1

    Always there to help you
    Register your product and get support at
    www.philips.com/support

    Question?
    Contact
    Philips

    User manual

    BT7500B



  • Page 2



  • Page 3

    Contents
    1 Important

    2

    2 Notice

    3

    3 Your Bluetooth speaker

    4

    4 Get started

    6

    5 Use Bluetooth devices

    7

    6 Other features

    9

    Compliance 3
    Care of the environment
    3
    Trademark notice
    3

    Introduction 4
    What's in the box
    4
    Overview of the speaker
    5

    Connect power
    Turn on
    LED indicator status

    6
    6
    6

    Connect a device
    7
    Play from Bluetooth device
    8
    Enter Bluetooth pairing mode
    8
    Disconnect the Bluetooth-enabled device 8
    Connect a fourth Bluetooth device
    8

    Listen to an external device
    Charge your mobile devices
    Adjust volume

    9
    9
    9

    7 Product information

    10

    8 Troubleshooting

    11

    Specifications

    10

    General 11
    About Bluetooth device
    11

    EN

    1



  • Page 4

    1 Important
    Warning
    •• Never remove the casing of this speaker.
    •• Never lubricate any part of this speaker.
    •• Never place this speaker on other electrical equipment.
    •• Keep this speaker away from direct sunlight, naked
    flames or heat.

    •• Make sure that you always have easy access to the

    power cord, plug, or adaptor to disconnect the speaker
    from the power.








     

    Make sure that there is enough free space
    around the speaker for ventilation.
    Use only power supplies listed in the user
    manual.
    The speaker shall not be exposed to
    dripping or splashing.
    Do not place any sources of danger on
    the speaker (e.g. liquid filled objects, lighted
    candles).
    Only use attachments/accessories specified
    by the manufacturer.
    Where the plug of the Direct Plug-in
    Adapter is used as the disconnect device,
    the disconnect device shall remain readily
    operable.

    Note
    •• The type plate is located on the bottom of the product.

    2

    EN



  • Page 5

    2 Notice
    Any changes or modifications made to this
    device that are not expressly approved by
    WOOX Innovations may void the user’s
    authority to operate the equipment.

    Compliance

    Hereby, WOOX Innovations declares that this
    product is in compliance with the essential
    requirements and other relevant provisions
    of Directive 1999/5/EC. You can find the
    Declaration of Conformity on www.philips.com/
    support.

    Care of the environment

    helps prevent negative consequences for the
    environment and human health.
    Environmental information
    All unnecessary packaging has been omitted.
    We have tried to make the packaging easy to
    separate into three materials: cardboard (box),
    polystyrene foam (buffer) and polyethylene
    (bags, protective foam sheet.)
    Your system consists of materials which can
    be recycled and reused if disassembled by
    a specialized company. Please observe the
    local regulations regarding the disposal of
    packaging materials, exhausted batteries and old
    equipment.

    Trademark notice

    The Bluetooth® word mark and logos are
    registered trademarks owned by Bluetooth
    SIG, Inc. and any use of such marks by WOOX
    Innovations is under license.

    Disposal of your old product

    Your product is designed and manufactured
    with high quality materials and components,
    which can be recycled and reused.

    This symbol on a product means that the
    product is covered by European Directive
    2012/19/EU. Inform yourself about the local
    separate collection system for electrical and
    electronic products. Follow local rules and never
    dispose of the product with normal household
    waste. Correct disposal of old products

    The N Mark is a trademark or registered
    trademark of NFC Forum, Inc. in the United
    States and in other countries.

    This is CLASS II apparatus with double
    insulation, and no protective earth provided.

    EN

    3



  • Page 6

    3 Your Bluetooth
    speaker
    Congratulations on your purchase, and
    welcome to Philips! To fully benefit from the
    support that Philips offers, register your product
    at www.philips.com/welcome.

    Introduction
    With this speaker, you can
    • enjoy audio from your Bluetooth-enabled
    devices or other external audio devices;
    and
    • charge mobile devices through the USB
    socket.

    What's in the box
    Check and identify the contents of your
    package:
    • Main unit
    • AC/DC adaptor
    • Power cord
    • Short user manual
    • Safety and notice leaflet

    4

    EN



  • Page 7

    Overview of the speaker
    a b cd

    e

    a

    fg h

    • Turn the speaker on.
    • Switch to standby mode.

    b Volume knob
    • Adjust volume.
    c PAIRING
    • Enter Bluetooth pairing mode.
    d NFC
    • Connect a device with NFC feature
    through Bluetooth.
    e LED indicator
    f AUDIO IN
    • Connect an external audio device.
    g CHARGING
    • Charge mobile devices in AC mode.
    h DC IN
    • Connect power.

    EN

    5



  • Page 8

    4 Get started
    Always follow the instructions in this chapter in
    sequence.

    Connect power

    Switch to standby mode
    The speaker switches to standby mode in the
    following situations:
    • In power on mode, press .
    • No audio is played or no key is pressed for
    15 minutes.
    Wake up from standby mode
    • In standby mode, press or PAIRING.
    • Tap the NFC tag with your mobile phone.

    Caution
    •• Risk of product damage! Make sure that the power

    voltage corresponds to the voltage printed on the back
    or underside of the speaker.
    •• Risk of electric shock! When you unplug the AC
    adapter, always pull the plug from the socket. Never
    pull the cord.

    Connect the power adaptor to:
    • the DC IN socket on the speaker.
    • the wall outlet.

    LED indicator status
    Mode
    Standby
    mode
    Bluetooth
    mode

    Audio-in
    mode

    Turn on
    Press .
    »» The speaker switches to Bluetooth
    mode.
    »» The LED indicator flashes blue.

    6

    EN

    LED status
    Solid red.
    Flashing blue while connecting, or
    waiting for pairing; Solid blue after
    connected.
    Flash blue shortly when the
    volume reaches the maximum/
    minimum.
    Solid green.
    Flashing green shortly when the
    volume reaches the maximum/
    minimum.



  • Page 9

    5 Use Bluetooth
    devices

    NFC

    With this speaker, you can listen to audio from
    Bluetooth-enabled devices.

    Connect a device
    Note
    •• Make sure that your Bluetooth device is compatible
    with this speaker.

    •• Before pairing a device with this speaker, read its user
    manual for Bluetooth compatibility.

    •• The speaker can memorize a maximum of 8 paired

    devices.
    •• Make sure that Bluetooth function is enabled on your
    device, and your device is set as visible to all other
    Bluetooth devices.
    •• Any obstacle between this speaker and a Bluetooth
    device can reduce the operational range.
    •• Keep away from any other electronic device that may
    cause interference.

    Option 1: Connect a device through
    NFC
    Near Field Communication (NFC) is a
    technology that enables short-range wireless
    communication between various NFC
    compatible devices, such as mobile phones and
    IC tags.
    If your Bluetooth device supports NFC, you can
    connect it with this speaker easily.

    1
    2

    On your device, enable NFC and
    Bluetooth functions (refer to the user
    manual of the device).
    Tap the NFC tag on the top of the speaker
    with the back of your Bluetooth device.
    »» The LED indicator flashes blue.

    3

    Follow the on-screen instructions to
    complete the pairing and connection.
    »» After successful pairing and connection,
    the speaker beeps twice, and the LED
    indicator turns solid blue.

    Option 2: Connect a device manually
    Note
    •• The operational range between this speaker and a

    Bluetooth device is approximately 10 meters (30 feet).

    •• The speaker switches to Bluetooth pairing mode

    automatically every time when you turn on the speaker.

    1
    2
    3

    Press PAIRING for two seconds to enter
    Bluetooth pairing mode..
    »» The LED indicator flashes blue.
    On your Bluetooth device, enable
    Bluetooth and search for Bluetooth devices
    that can be paired (see the user manual of
    the device).
    Select [Philips BT7500] on your device to
    start pairing and connection. If necessary,
    input default password “0000”.
    »» After successful pairing and connection,
    the speaker beeps twice, and the LED
    indicator turns solid blue.

    EN

    7



  • Page 10

    2s

    Disconnect the Bluetoothenabled device



    Disable Bluetooth on your device; or
    Move the device beyond the
    communication range.
    »» The LED indicator flashes.

    To clear the Bluetooth pairing history:
    Press and hold PAIRING for more than 7
    seconds.
    Philips BT7500

    Play from Bluetooth device
    After successful Bluetooth connection, play
    audio on the Bluetooth device.
    »» Audio streams from your Bluetooth
    device to the speaker.
    Note
    •• The speaker synchronizes its volume with the

    connected Bluetooth devices which support volume
    sync function.
    •• Bluetooth devices with iOS or Android 4.4 or higher
    support sync function.

    Enter Bluetooth pairing mode
    Press and hold PAIRING for two seconds when
    the speaker is in standby mode or AUDIO IN
    mode.

    8

    EN

    Connect a fourth Bluetooth
    device
    The product can connect a maximum of 3
    Bluetooth devices simultaneously. If you try to
    connect a fourth device with this product, you
    may need to press and hold PAIRING for 2s,
    then an idle device that is connected earlier will
    be disconnected to enable 4th device to pair
    and connect.



  • Page 11

    6 Other features

    Charge your mobile devices
    You can charge your mobile devices through
    the CHARGING socket.

    Listen to an external device
    With this speaker, you can also listen to an
    external audio device such as an MP3 player.
    Note
    •• When an external audio device is connected, the

    speaker switches to audio-in mode only when no
    Bluetooth connection or music playback through
    Bluetooth is paused.

    1

    2

    Note
    •• The USB socket is for charging only.



    Connect the speaker to your mobile
    device with a USB cable (not supplied).
    »» Once the device is recognized, the
    charging starts.

    Connect an audio input cable (not
    supplied) with a 3.5 mm connector on
    both ends to:
    • the AUDIO IN socket on this speaker,
    and
    • the headphone socket on the external
    device.
    Play audio on the external device (refer to
    its user manual).

    Adjust volume

    AUDIO IN

    Rotate the volume knob on the top of the
    speaker to increase or decrease the volume.
    • When the volume reaches the maximum
    or minimum, the LED indicator shortly
    flash blue (Bluetooth mode) or green
    (AUDIO IN mode).

    Note
    •• The LED indicator turns to solid green when the
    speaker is in AUDIO IN mode.

    EN

    9



  • Page 12

    7 Product
    information
    Note
    •• Product information is subject to change without prior
    notice.

    Specifications
    Amplifier
    Rated Output Power
    Frequency Response

    2 X 15W
    63 - 20 KHz,
    +/- 3 dB
    > 72 dBA
    < 1%

    Signal to Noise Ratio
    Total Harmonic
    Distortion
    Audio Input

    650 mV RMS

    Bluetooth
    Bluetooth Version
    Supported Profiles
    Range

    V3.0
    A2DP, AVRCP
    10 m (Free space)

    General information
    AC power

    Charging Voltage and
    Current
    Operation Power
    Consumption

    10

    EN

    Brand name: PHILIPS;
    Model: AS600-180AA250
    Input: 100-240 V~,
    50/60 Hz, 1.5A;
    Output: 18.0V 2.5A
    5V 2.1A
    < 20 W

    Standby Power
    Consumption
    Dimensions - Main
    Unit (W x H x D)
    Weight - Main Unit

    < 0.5 W
    335 x 180 x 145 mm
    2.2 kg



  • Page 13

    8 Troubleshooting
    Warning
    •• Never remove the casing of this device.

    To keep the warranty valid, never try to repair
    the system yourself.
    If you encounter problems when using this
    device, check the following points before
    requesting service. If the problem remains
    unsolved, go to the Philips Web page (www.
    philips.com/support). When you contact Philips,
    make sure that the device is nearby and the
    model number and serial number are available.

    ••

    This product is already connected with
    another Bluetooth-enabled device.
    Disconnect that device and then try again.

    The paired device connects and disconnects
    constantly.
    •• The Bluetooth reception is poor. Move the
    device closer to this product or remove
    any obstacle between them.
    •• For some devices, Bluetooth connection
    may be deactivated automatically as a
    power-saving feature. This does not indicate
    any malfunction of this product.

    General
    No power
    •• Make sure that the AC power plug of the
    unit is connected properly.
    •• Make sure that there is power at the AC
    outlet.
    No sound or poor sound
    •• Adjust volume on the product.
    •• Adjust volume on the connected device.
    No response from the speaker
    •• Restart the speaker.

    About Bluetooth device
    The audio quality is poor after connection
    with a Bluetooth-enabled device.
    •• The Bluetooth reception is poor. Move the
    device closer to this product or remove
    any obstacle between them.
    Cannot connect with the device.
    •• The Bluetooth function of the device is not
    enabled. Refer to the user manual of the
    device for how to enable the function.
    EN

    11



  • Page 14

    Specifications are subject to change without notice.
    2014 © WOOX Innovations Limited.
    All rights reserved.
    Philips and the Philips’ Shield Emblem are registered
    trademarks of Koninklijke Philips N.V. and are used by WOOX
    Innovations Limited under license from Koninklijke Philips N.V.
    BT7500B_12_UM_V2.0






Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Philips BT7500 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Holen Sie sich Ihr Benutzerhandbuch per E-Mail

Geben Sie Ihre E-Mail-Adresse ein, um das Handbuch zu erhalten von Philips BT7500 in der Sprache / Sprachen: Englisch als Anhang in Ihrer E-Mail.

Das Handbuch ist 0,72 mb groß.

 

Sie erhalten das Handbuch in Ihrer E-Mail innerhalb von Minuten. Wenn Sie keine E-Mail erhalten haben, haben Sie wahrscheinlich die falsche E-Mail-Adresse eingegeben oder Ihre Mailbox ist zu voll. Darüber hinaus kann es sein, dass Ihr ISP eine maximale Größe für E-Mails empfangen kann.

Andere Handbücher von Philips BT7500

Philips BT7500 Bedienungsanleitung - Deutsch - 14 seiten

Philips BT7500 Bedienungsanleitung - Holländisch - 14 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info