Bedienungsanleitung Philips HD 5410 (Seite 8 von 60) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

111177

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

11 After you have poured coffee, put the jug with the remaining coffee back onto the hotplate

to keep the coffee hot and to preserve its avour (Fig. 10).

- However, coffee is at its best directly after is has been brewed (Fig. 11).

Tip: When the brewing process is nished, you can pour the hot coffee into a thermos jug to keep it hot

and fresh.



The drip stop function enables you to remove the jug from the coffeemaker before the brewing

process is nished. When you remove the jug, the drip stop stops the ow of coffee into the jug.

Note: The brewing process does not stop when you remove the jug. Place back the jug as soon as possible

to prevent overowing.

Note: Make sure the jug lid is in place when you put the jug back onto the hotplate. Without the jug lid,

the drip stop function is activated automatically.



1 Open the lter holder support (Fig. 12).

2 Lift the lter holder with the paper lter out of the lter holder support (Fig. 13).

3 Throw away the used paper lter with the coffee grounds (Fig. 14).

4 Switch off the appliance. (Fig. 15)



If you want to make another jug of fresh coffee right away, switch off the appliance and let it cool

down for three minutes. Fill the water tank with cold water again and put a new amount of ground

coffee in a new paper lter. Now you can make fresh coffee again.

Note: If you do not let the appliance cool down for three minutes before you brew coffee again,

water starts dripping into the lter holder right away.

- Make sure you pour the rst amount of fresh water against the temperature sensor in the

centre of the cover (Fig. 16).

When you do this, the outow opening in the bottom of the water tank closes again.



Never immerse the appliance in water or any other liquid.

Never use scouring pads, abrasive cleaning agents or aggressive liquids such as petrol or acetone

to clean the appliance.

1 Switch off and unplug the appliance.

2 Clean the outside of the appliance with a moist cloth.

3 Clean the detachable parts in hot water with some washing-up liquid or in the dishwasher.

4 Clean the rubber insert in the outow opening of the water tank every month and after

every descaling procedure (Fig. 17).

Do not forget to put the insert back into place before you use the appliance again.

Never remove the rubber insert if there is still hot water in the water tank.

8

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips HD 5410 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info