Bedienungsanleitung Philips hi478 (Seite 7 von 8) (Englisch)

321386

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

Temperature and Fabric Guide

Follow garment label instructions for best ironing results.Test iron temperature setting on an inside

or small hidden section of garment before ironing.

Fabric guide located on the heel rest of iron gives temperature settings for most common fabrics.

Ironing velvet or any other nap/sensitive fabric is not recommended. Be sure to check manufacturers label for care instructions.

*Trademarks of fiber manufacturers.

IRONING INSTRUCTIONS

Turn Temperature Control to section marked Min.Start at the begin-

ning of Min section and slowly increase temperature setting as need-

ed to reach proper temperature.

Iron delicate fabrics on wrong side to avoid shining or glazing.If

moisture is necessary, use a press cloth and MED setting.

When pressing suede, use brown paper as press cloth and to cover

ironing board.This will help prevent suede from rubbing off.

When pressing Ultrasuede* use a press cloth and press lightly on

wrong side. Brush fabric lightly to remove press marks.

When pressing some triacetates,a higher heat setting may be

required.Slowly increase temperature as needed to reach proper

temperature.

Turn Temperature Control to section marked LO/MED (•).

Start at the beginning of the LO/MED section for lightweight 100%

synthetic permanent press fabrics.Some heavier polyester fabrics

may require steam at positions 1 (LO) or 2 (MED) setting.Some

durable silk fabrics may require a higher heat setting.Slowly increase

setting as needed to reach proper temperature.

Turn Te m p e r a t u re Control to section marked MED (••).Turn Steam

C o n t r ol to Position 2 (MED).Most permanent press blends containing

cotton re q u i re this setting.Test iron on inside seam or small hidden sec-

tion of garment.If shine or color change occurs,use a press cloth.

Turn Temperature Control to section marked HI (•••).Turn Steam

Control to Position 3 (HI).

When ironing wool,always use a press cloth and moisture. Never

press wool dry.

Turn Temperature Control to maximum setting.Turn Steam Control

to position 4 (MAX).Lightly dampen fabric for thorough pressing.

Iron dark colored fabrics on the wrong side to avoid shining.

TEMP

CONTROL

SETTING

Min

Lo (•)

Med

Med (••)

Hi (•••)

STEAM

SETTING

0= Dry Iron

Only

0= Dry Iron

Only

Pos.1= (LO)

Pos. 2= (MED)

Pos. 3= (HI)

Pos.4= (MAX)

FABRIC

Acetates

Acrylics

Acrilan*

Creslan*

Orlon*

Sheer Synth

Suede

Ultrasuede

Nylons

Antron*

Caprolan*

Qiana*

Triacetates

Arnel*

Metallics

Polyesters

Dacron*

Fortrel*

Kodel*

Trevira*

Rayon

Silk

Perm Press

Polyester

Cotton

Wool

Cotton

Linen

4 Loop cord around cord wrap when storing.

Always store the iron standing on its heel in a safe dry place.

5 To clean body of iron,use mild detergent and soft cloth only.

Never use harsh household cleansers,abrasive cleansers or

scouring pads to clean iron housing

–

scratching/fading of

housing colors may occur.

To clean and maintain

polished Optinox soleplate

1 On a soft cloth, make a thin paste of abrasive household

cleaner and water. Gently rub surface of soleplate to remove

starch or residue build-up.

2 Fill iron with water (see Section Filling the Removable Water

Reservoir).

3 Set Temperature Control to maximum setting.

4 Allow iron to heat up approximately 2 minutes.

5 Turn Steam Control to position 4 (MAX) and allow iron to

steam for a few minutes.

6 Iron over old cotton cloth to remove paste/cleanser from iron

bottom and steam vents.

7 Turn Temperature Control to Min position and allow to cool

completely. Unplug cord from electrical oulet and empty

removable reservoir.

8 Should soleplate become scratched, most minor scratches can

be removed using fine steel wool. After buffing, follow steps 2-

6 before ironing on garments.

9 Wipe soleplate clean.

HI478/IRON.FA 1/13/00 2:35 PM Page 12

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips hi478 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info