4 Remove the sha ving heads from the sha ving unit
one by one (Fig. 14) .
Note: Do not clean more than one cutter and guard at a
time, since they are all matching sets. If you accidentally mix
up the cutters and guards, it may tak e sever al weeks before
optimal shaving performance is restor ed.
5 Remove the cutter fr om the guard (Fig. 15) .
6 Clean the cutter with the short-bristled side of the
brush (Fig. 16) .
7 Brush the guard (Fig. 17) .
8 Put the shaving heads back into the sha ving unit.
9 Put the retaining frame back into the sha ving unit
and turn the wheel clockwise.
10 Put the shaving unit back onto the sha ver .
Tip: For optimal shaving perf ormance , we
advise you to lubricate the shaving heads with a drop of
sewing machine oil ever y six months.
Storage
- Put the protection cap on the shav er after use to
prevent damage to the sha ving heads (Fig. 8) .
Replacement
Replace the shaving heads ev er y two years for optimal
shaving results.
Replace damaged or worn shaving heads with HQ4+
Philips Micro+ Lift & Cut
Shaving Heads.
1 Switch off the shav er .
2 Pull the shaving unit off the sha ver
(Fig. 10) .
3 T urn the wheel anticlockwise (1) and remov e the
retaining frame (2) (Fig. 13) .
4 Remove the sha ving heads from the sha ving unit
and replace them with ne w ones (Fig. 14) .
5 Put the retaining frame back into the sha ving unit
and turn the wheel clockwise.
6 Put the shaving unit back onto the sha ver .
Accessories
T o retain the top performance of your shav er , mak e sure
you clean it regularly
and replace its shaving heads at the
recommended time.
Sha ving heads
- W e advise y ou to replace your shaving heads ev er y
two y ear s. Al ways replace with HQ4+ Philips Micro+
Lift & Cut Shaving Heads (Fig. 18)
Cleaning
- Use Cleaning Spray (HQ110, not
availab le in some countr ies) to clean the sha ving
heads thoroughly .
Envir onment
- Do not throw awa y the appliance with the nor mal
household waste at the end of its life, but hand it in
at an offi cial collection point for recycling. By doing
this, y ou help to preser ve the environment (Fig. 19) .
- Batteries contain substances that may pollute
the environment. Do not thro w away empty
batteries with the nor mal household waste, but
dispose of them at an offi cial collection point for
batteries. Always remo ve the rechargeable batteries
before you discard and hand in the appliance at an
offi cial collection point.
Disposal of the recharg eable batter y
Only remo ve the rechargeable battery when it is
completely empty .
1 Disconnect the shav er from the mains.
2 Let the shav er run until it stops, undo the scr ew on
the back of the sha ver (1) and lift the back panel off
the sha ver (2) (Fig. 20) .
3 Remove the r echargeable
battery (Fig. 21) .
Do not connect the sha ver to the mains again after the
battery has been removed.
Guarantee and service
If you need ser vice or information or if you ha ve a
problem, please visit the Philips w ebsite at www .philips.
com or contact the Philips Consumer Care Centre
in your countr y (y ou fi nd its phone n umber in the
worldwide guar antee leafl et). If there is no Consumer
Care Centre in your countr y , go to your local Philips
dealer .
Guarantee restrictions
The shaving heads (cutters and guards) are not covered
by the terms of the inter national guarantee because they
are subject to wear .
T roubleshooting
Problem Solution
The shav er
does not shav e
as well as it
used to.
Y ou may not ha ve cleaned the
appliance proper l y . Clean the sha ving
heads thoroughly (see chapter
‘Cleaning and maintenance’).
Problem Solution
Long hair s ma y be obstr ucting the
shaving heads. Clean the cutters
and guards proper l y with the br ush
supplied (see chapter ‘Cleaning and
maintenance’).
The shaving heads ma y be damaged
or worn. Replace the sha ving heads
(see chapter ‘Replacement’).
The batteries may be
r unning lo w . Recharge
the shav er (see chapter ‘Charging’).
The
shav er does
not switch on
when I push
the on/off slide
upwards.
The batteries may be empty .
Recharge the shaver (see chapter
‘Charging’).
ภาษาไทย
ขอมูลเบื้องตน
ขอแสดงความยินดีที่คุ ณสั่งซื้อและยินดีตอนรั บสูผลิตภัณฑของ Philips! เพื่อใหคุณได
รับประโยชนอยางเต็มที่จากบริ การที่
Philips มอบให โปรดลงทะเบียนผลิตภัณฑของคุณที ่
www .philips.com/welcome
ขอสําคัญ
ควรอานคูมืออยางละเอียดกอนใชงานและเก็บไวเพื ่อใชอางอิงในครั้งตอไป
อันตราย
- ควรเช็ดเครื่องใหแหงสนิท
- เครื่องหมายนี้แสดงวา: หามทําความสะอาดเครื่องโดยเปดนํ้ากอกใหไหลผาน
เครื่อง
คําเตือน
- ไมควรใหบุคคล (รวมทั้งเด็กเล็ ก) ที่มีสภาพรางกายไมแข็งแรงหรือสภาพจิตใจ
ไมปกติ หรือขาดประสบการณและความรูความเขาใจ นําเครื ่องนี้ไปใชงาน เวน
แตจะอยูในการควบคุมดูแลหรือไดรั บคําแนะนําในการใชงานโดยผูที่รับผิ ดชอบ
ในดานความปลอดภัย
- เด็กเล็กควรไดรับการดูแลเพื ่อปองกันไมใหเด็กนําผลิตภัณฑนี ้ไปเลน
ขอควรระวัง
- ใชและจัดเก็บเครื่องโกนหนวดไวที ่อุณหภูมิระหวาง 5°C และ 35°C
Electromagnetic fields (EMF)
- ผลิตภัณฑของ Philips ไดมาตรฐานดานคลื่นแมเหล็ กไฟฟา (EMF) หากมีการ
ใชงานอยางเหมาะสมและสอดคลองกับคําแนะนําในคูมื อนี้ คุณสามารถใช
ผลิตภัณฑไดอยางปลอดภัยตามขอพิสู จนทางวิทยาศาสตรในปจจุบัน
การชารจแบตเตอรี่
ในการชารจไฟครั้งแรกหรือหลังจากที ่ไมไดใชงานเครื่องโกนหนวดเปนเวลานาน ควร
ชารจไฟทิ้งไวตอเนื่องนาน 12 ชั ่วโมง ปกติเวลาชารจไฟจะใชเวลาประมาณ 8 ชั่วโมง
ชารจเครื่องโกนหนวดเมื่อมอเตอรหยุ ดทํางานหรือเริ่มทํางานชาลง
เมื่อชารจไฟจนเต็มเรียบรอยแลว สามารถใชงานเครื ่องโกนหนวดแบบไรสายไดนาน
ถึง 30 นาที
คําเตือน: หามเชื่อมตอเครื่ องโกนหนวดเขากับสายไฟหลักนานเกิน 24 ชั่วโมง
1 ปดการใชงานเครื่องโกนหนวดกอนเริ่มตนชารจไฟ
2 ดึงขาเสียบออกมา (เสียงดัง ‘คลิก’) (รู ปที่ 2)
3 เสียบปลั๊กไฟเขากับเตารับบนผนัง (รูปที่ 3)
, สั ญญาณไฟจะสวางขึ้น เพื่อแสดงใหทราบวาเครื่องกํ าลังชารจไฟ
อยู (รูปที่ 4)
4 ถอดเครื่องโกนหนวดออกจากเตาเสียบ หลังจากชารจเสร็จแลว
5 กดปุมปลดล็อค (1) แลวพับขาเสียบกลั บเขาไปในตัวเครื่อง (2) (เสียง
ดัง ‘คลิก’) (รูปที่ 5)
การใชงาน
1 ถอดฝาครอบปองกันออก
2 เลื่อนสวิตชเปด/ปดไปดานหนาเพื่อเปดใชงาน
(รูปที่ 6)
3 เคลื่อนหัวโกนไปตามผิวหนัง ทั้ งในแนวตรงและวนไปมาอยาง
รวดเร็ว (รูปที่ 7)
หมายเหตุ: ใชโกนหนวดขณะผิวแหงจะไดผลดีที่สุด
หมายเหตุ: อาจตองใชเวลาประมาณ 2 หรือ 3 สัปดาหเพื่อใหผิวของคุณปรับ
สภาพใหเหมาะสมกับเครื่องโกนหนวด Philips
4 เลื่อนสวิตชเปด/ปดไปดานหลังเพื่อปดการทํางาน
5 ปดฝาครอบหัวโกนลงบนเครื่องโกนหนวดทุกครั้ง เพื ่อปองกันไมใหหัว
โกนชํารุด (รูปที่ 8)
การทําความสะอาดและบํารุงรักษา
ควรทําความสะอาดเปนประจํา เพื่อใหการใชงานเปนไปอยางมี ประสิทธิภาพ
คําเตือน: ควรใชงานและเก็ บในที่แหง เนื่องจากเครื่ องโกนหนวดรุนนี้ไม
สามารถกันนํ้าและลางทําความสะอาดดวยนํ ้าประปาได
เพื่อใหไดผลลัพธการทําความสะอาดที ่ดีที่สุด ขอแนะนําใหใชสเปรยทํ าความสะอาด
ของ Philips (HQ110)
ทุกสัปดาห: อุ ปกรณในการโกนหนวดและชองเก็บเศษหนวด
1 ปดสวิตซเครื่องโกนหนวด
2 ทําความสะอาดดานนอกของหัวโกนดวยแปรงที่จัดมาให (รูปที่ 9)
3 ดึงชุดหัวโกนออกจากเครื่องโกนหนวด (รูปที่ 10)
4 ทําความสะอาดภายในชุดหัวโกน (รูปที่ 11)
5 ทําความสะอาดชองเก็บเศษหนวด (รูปที่ 12)
6 ประกอบชุดอุปกรณโกนหนวดกลับเขาที่เดิม
ทุกๆ 2 เดือน: หัวโกน
หมายเหตุ: ไมควรใชนํ้ายาหรือแอลกอฮอลทําความสะอาดหัวโกน ควรใชส
เปรยนํ้ายาทําความสะอาดหัวโกนรุน HQ110 เทานั้ น
1 ปดเครื่องโกนหนวด
2 ดึงชุดหัวโกนออกจากเครื่องโกนหนวด (รูปที่ 10)