Bedienungsanleitung Philips HR1871 (Seite 7 von 86) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Türkisch, Schwedisch)

507573

Zoom out

Zoom in

Vorherige Seite

1/86

Nächste Seite

Never use any accessories or parts from other manufacturers or that Philips does not specically

recommend. If you use such accessories or parts, your guarantee becomes invalid.

- For a stable stand of the appliance, always keep the countertop and the bottom of the appliance clean.

- Make sure all parts are correctly assembled before you switch on the appliance.

- Only use the appliance when the locking arm is in locked position.

- Only lower the locking arm to unlocked position after you have switched off the appliance and

the lter has stopped rotating.

- Always unplug the appliance after use.

Safety feature

- This juicer is tted with a safety feature which safeguards against overheating due to excessive loads.

In case of overheating, the juicer automatically activates the overload protection and switches itself

off. If this occurs, set the control knob to 0, unplug the appliance and allow it to cool down for 15

minutes. Remove the juice jug and detach the lid, juice collector and the integrated pulp container

and then press the overload protection button on the bottom of the motor unit (Fig. 2).



This Philips appliance complies with all standards regarding electromagnetic elds (EMF). If handled

properly and according to the instructions in this user manual, the appliance is safe to use based on

scientic evidence available today.

Preparing for use

1 Make sure all detachable parts are clean (see chapter ‘Cleaning’) and assembled correctly.

2 Unwind the mains cord from the base of the motor unit (Fig. 3).

3 Assemble the integrated pulp container onto motor unit (Fig. 4).

4 Assemble the juice collector onto the integrated pulp container (Fig. 5).

5 Assemblethelterontothedrivingshaftofthemotorunit.Makesurethelteristted

securelyontothedrivingshaft(Fig.6).

6 Assemble the lid onto the juicer (Fig. 7).

7 Lift the locking arm to locked position (Fig. 8).

8 Placethelidonthejuicejugtoavoidspattering(Fig.9).

Note: The integrated foam separator ensures clear juice as an end result.

9 Place the juice jug under the spout (Fig. 10).

Note: If you want to extract juice straight into a glass, use the spout accessory (Fig. 11).

Using the appliance

The appliance only functions if all parts are assembled correctly and the locking arm is in locked

position.

1 Washthefruitand/orvegetablesandcutthem,ifnecessary,intopiecesthattintothe

feeding tube.

2 Make sure the juice jug is placed directly under the spout (Fig. 10).

3 Turn the control knob to setting 1 (low speed) or 2 (normal speed) to switch on the

appliance (Fig. 12).

ENGLISH 7

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips HR1871 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info