Bedienungsanleitung Philips lpf 925 (Seite 4 von 40) (Englisch)

424302

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

4 Philips LPF 920 · 925 · 935 · 940

1 General Safety Information

Your device has been tested in conformity with standards

EN 60950-1 and IEC 60950-1 and should only be operat-

ed with telephone systems and power equipment that meet

these standards. The device was built exclusively for use in

the indicated sales region.

Do not make any changes or settings that are not described

in this user manual.

Setting Up the Machine

The device should rest securely on a stabile, flat surface.

The device should rest securely on a stabile, flat surface. If

the device should fall, it can be damaged or can cause injury

to people, especially small children. Position all cables in

such a way that no one will stumble on them, thus avoiding

possible injuries to persons or damage to the device itself.

The distanc e between the device a nd other appliances o r objects, must be at le ast 15 centimetres.

The distance between the device and other devices or ob-

jects must be at least 15 centimetres; this also applies to the

use of additional cordless telephones. Do not place the de-

vice in the vicinity of radios or televisions.

Lock the cove r of the device completely into pl ace

Lock the cover of the device completely into place when

opening the device. You could be injured if the cover falls

while you are working on the device.

Protect the dev ice against direct sunlight

Protect the device against direct sunlight, heat, large temper-

ature fluctuations and moisture. Do not place the device in

the vicinity of heaters or air conditioners. Observe the infor-

mation on temperature and humidity in the technical data.

The device must have sufficient ventilation

The device must have sufficient ventilation and may not be

covered. Do not put your device in closed cabinets or box-

es. Do not place the machine on soft surfaces such as table-

cloths or carpets and do not cover the ventilation slits.

Otherwise, the device can overheat and catch on fire.

The area in which you operate the device must be adequately ventilated

The area in which you operate the device must be ade-

quately ventilated, especially if the device is used frequent-

ly. Set up your device in such a way that the flow of the ex-

haust air stream points away from the work station.

In the event that t he device becomes too hot, or if y ou see smoke coming from the devic e

In the event that the device becomes too hot, or if you see

smoke coming from the device, you must immediately pull

the power cable out of the power socket. Have your device

examined by trained professionals at a technical service lo-

cation. To prevent the spread of fire, open flames should

be kept away from the device.

Do not plug in the device in moist rooms.

Do not plug in the device in moist rooms. Never touch the

mains cable, the mains connection or the telephone socket

with wet hands.

Do not allow liquids to enter into the device.

Do not allow liquids to enter into the device. Disconnect

the device from the power socket if liquids or foreign ob-

jects have entered the device and have your device exam-

ined by trained professionals at a technical service location.

Do not allow c hildren to handle the device withou t supervision.

Do not allow children to handle the device without super-

vision. The packing materials should be kept out of the

hands of children.

Magnetic telephone handset

The telephone handset of the device is magnetic. Caution,

small metallic objects (paper clips) may be retained if

placed near or on the telephone handset.

Power Supply

Check whether the mains voltage of your device

Check whether the mains voltage of your device (indicated

on the type label) matches the mains voltage available at

the setup location.

Use only the power and telephones cables supplied.

The device does not have an on/off button.

Set up your device so that the power socket is easily acces-

sible. The device does not have an on/off button. In an

emergency, disconnect your device from the power supply

by pulling the power plug.

Never touch the power or telephone cable if the insulation is damaged.

Never touch the power or telephone cable if the insulation

is damaged.

Disconnect your devic e from the power and telephone networks during an electrical storm.

Disconnect your device from the power and telephone net-

works during an electrical storm. If this is not possible, do

not use the device during an electrical storm.

Before cleaning the surface of your device, disconnect it from the power and telephone networks.

Before cleaning the surface of your device, disconnect it

from the power and telephone networks. Never use liquid,

gaseous or easily flammable cleansers (sprays, abrasives,

polishes, alcohol).

Only clean the di splay with a dry, soft cloth.

Only clean the display with a dry, soft cloth. If the display

breaks, a mildly corrosive liquid may escape. Avoid all con-

tact with your skin and eyes.

In the event of a power failure, your device will no t function;

In the event of a power failure, your device will not func-

tion; saved data is retained.

Repairs

Should disruptions occur, follow the instructions on the

display and on the error report.

Do not make any repairs to the device yourself. Improper

maintenance can result in injuries or damage to the device.

Only have your device repaired by an authorised service

centre.

Do not remove the type label from your device; this would

void the warranty.

Consumable Materials

Use only original consumable materials. These are availa-

ble from a specialised retailer or through our order service

(see back side of this user manual). Other consumable ma-

terials could damage the device or shorten its service life.

Dispose of old consumable materials according to the

waste regulations of your country.

Never open a toner cartridge. If toner dust is released into

the air, you should avoid allowing it to contact your skin

and eyes. Store both new and used cartridges in a place

where they will not come into the hands of children.

In case of a paper jam, do not forcefully remove the paper,

but rather pull it gently out of the device and throw it away

carefully: It is possible that the toner may not be complete-

ly set on the print-out, and toner dust could be released

into the air. Do not inhale the released toner dust. Remove

the toner dust from clothing or objects with cold water;

hot water would only cause the toner to set.

Laser-Safety

Your device operates with laser beams. Only a qualified

service technician should open the device and carry out

service operations; otherwise there is a risk of eye injuries

resulting from both visible and invisible laser radiation.

Class 1 La ser Product

Ã Class 1 Laser Product

Philips lpf 925 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info