Bedienungsanleitung Philips LX7000SA (Seite 29 von 31) (Englisch)

663514

Zoom out

Zoom in

Vorherige Seite

1/31

Nächste Seite

English

Clock/Timer

Timer setting

The system can switch on to DISC or TUNER mode

automatically at a preset time, serving as an alarm to wake

you up.

IMPORTANT!

– Before setting the timer, ensure that the clock

is set correctly.

– The timer will always be switched on after it

has been set.

– The volume of the timer will increase gradually

to minimum level 12 or the last tuned volume

level.

1 Hold down CLOCK•TIMER for more than two

seconds to enter timer mode.

➜ The clock timer and starts flashing.

2 Press SOURCE repeatedly (or DISC or TUNER on the

remote control) to select the sound source.

➜ “DISC XX:XX" indicates the disc mode is selected.

➜ “TUNER XX:XX” indicates the Tuner mode is selected.

3 Press S or T to set the hours and minutes. To

increase the speed, hold down S or T.

4 Press CLOCK•TIMER to store the timer.

➜ The set timer "XX:XX" and the selected source are

displayed.

➜ remains on the display.

● At the preset time, the selected sound source will play.

➜ If DISC source is selected, the timer will wake up by

playing the first track of the disc or programmed track. If

the disc tray is empty, it will switch to Tuner mode.

➜ If Tuner source is selected, the timer will wake up by

playing the last tuned radio station.

Note:

– During timer setting, if no button is pressed within 90

seconds, the system will exit timer setting mode automatically.

CLOCK/TIMER

Deactivating the timer

1 Hold down CLOCK•TIMER for more than two

seconds to enter timer mode.

2 In timer mode, press Ç on the system to cancel the timer.

➜ disappears from the display and "TIMER OFF" is

displayed.

Activating the timer to the last preset

time and source

1 Hold down CLOCK•TIMER for more than two

seconds to enter timer mode.

2 Press CLOCK•TIMER again to store the timer setting.

➜ The last set timer information is displayed for a few

seconds and is shown.

Sleep timer setting

The sleep timer enables the system to switch to standby

mode automatically at a preset time.

1 Press SLEEP on the remote control repeatedly to select a

preset amount of time after which the system will shut itself

off automatically.

➜ The selections are as follows (time in minutes):

15 ™ 30 ™ 45 ™ 60 ™ 90 ™ 120 ™ OFF ™ 15 …

➜ "SLEEP XX" or "SLEEP OFF" is displayed. "XX" is the

time in minutes.

2 When you reach the desired length of time, stop pressing

the SLEEP button.

➜ The sleep timer is now set. Before the system switches

to standby mode, a countdown of 10 seconds is displayed.

"SLEEP 10" ™ "SLEEP 9".... ™ "SLEEP 1"

™ "SLEEP"

To check the remaining length of time after

sleep timer is activated

● Press SLEEP once.

To change the preset sleep timer

● Press SLEEP again while the remaining sleep timer is

shown.

➜ The display will show the sleep timer options.

To deactivate the sleep timer

● Press SLEEP repeatedly until "SLEEP OFF" is displayed,

or press the STANDBY ON button.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips LX7000SA Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips LX7000SA

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info