Bedienungsanleitung Philips Magic (Seite 33 von 36) (Englisch)

521762

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Anhang

10 Appendix

Technical specification

Compatibility ITU Group 3

Type of connection outside line (PSTN) / extension (PABX)

Flash times Singapore: outside line (PSTN): 600 ms

extension (PABX): 600 ms

other countries: outside line (PSTN): 100 ms

extension (PABX): 100 ms

Size of document width: single sheet 148 - 217 mm

several sheets 148 - 217 mm

length: single sheet 100 - 600 mm

several sheets 148 - 297 mm

thickness: single sheet 0.05 - 0.2 mm

several sheets 0.08 - 0.12 mm

Printing paper A4 210 x 297 mm, 80 g/m

Largest scanning width 216±1 mm

Resolution horizontal: 8 points/mm (200 dpi)

vertical: standard 3.85 lines/mm

fine 7.7 lines/mm

Photo mode 16 grey tones (fax machine

without integrated answering device)

64 grey tones (fax machine

with integrated answering device)

Contrast control automatic

Copying fine and photo resolution

Data compression MH, MR

Modulation V29bis, V27ter, V21

Transmission speeds 9600/7200/4800/2400 bps

Sound power level stand by mode: <30 dBA

copy mode: <53 dBA

Printing method ink film printer

Fax paper standard A4 letter 210 x 297 mm (document)

Document feed up to 10 letters (80 g/m²)

Fax switch DAY/NIGHT/TIMER

Dimensions 357 x 253 x 160 mm (without paper tray)

Weight about 3 kg

Power consumption stand by: about 3 W

telephoning: about 5 W

sending a standard letter: ca. 20 W

receiving a standard letter: ca. 35 W

Power supply 220-240 V / 50-60 Hz

Speech recording time up to 15 minutes

Speech output yes

Allowed operating environment temperature: 5 - 40 °C

relative humidity: 15 - 85 % RH not condensing

Recommended operating

environment in use: temperature: 17 - 28 °C

relative humidity: 20 - 80 % RH not condensing

Recommended operating

environment in unplugged status

(ready for operation with

loaded ink film and paper): temperature: 0 - 45 ° C

relative humidity: 15 - 85 % RH not condensing

Interference suppression: with EN 55022 / VDE 0878 part 1 class B

Glossary

additional device, additional telephone: You can operate your fax machine together

with additional devices such as (cordless) telephones, an answering machine etc. on a

single telephone line. You have to enter some specific settings.

calling line identification: When you receive a telephone call, the number of the

calling party will be shown on the display (not supported by all network providers).

DMM (Dynamic Message Memory): Messages of the built-in answering machine as

well as fax messages that had not been printed will be stored in this memory .

document: The written note you want to send by fax to another party.

DTMF: short for “Dual Tone Multiple Frequency”. With this signal you can start fax

reception from an additional telephone which has tone dialling.

fax switch, automatic and manual receive: The fax switch analyses incoming calls and

detects whether it is a normal call or a fax call. If you have chosen automatic receive a

fax will be received automatically and silently. If you have chosen manual receive, the

fax switch is not operating and faxes can only be received by pressing START.

incoming message: The message a caller can leave when your answering machine is

switched on and he speaks after the beep tone.

ink film: An “ink” coated foil (similar to a ribbon) for printing out on plain paper.

ITU : International Telecommunications Union

outgoing message (OGM): As a factory setting an outgoing message is recorded. When

your answering machine is switched on the caller hears this message which is followed

by a beep tone.

parallel: When more than one telecommunication device is—depending on the

country—either connected parallel or serial (one after the other).

polling: You can collect documents which have been prepared for collection at a

remote fax machine.

private branch exchange (PABX): Private branch exchange systems are common in

most large companies. They provide a kind of internal telephone network. In order to

connect to the public network you must first dial an outside line.

pulse dialling: The old dialling mode is pulse dialling. Every number key has a specific

number of pulses assigned to it.

sender identification: On most fax machines the name and the number of the user can

be entered. This so-called sender identification will be printed on the fax receipt and

will also appear on the display of the fax correspondent’s machine.

serial: When more than one telecommunication device is—depending on the coun-

try—either connected parallel or serial (one after the other).

tone dialling: Tone dialling is the modern dialling mode. Every key has a different tone

assigned to it.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips Magic Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips Magic

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info