67102
22
Zoom out
Zoom in
Vorherige Seite
1/24
Nächste Seite
22
English
FM/MW Radio
Cleaning the Cabinet
• Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abra-
sives.
Cleaning Discs
When a disc becomes dirty, clean it with a cleaning cloth.Wipe the disc from the centre out. Do not wipe in a circular motion.
• Do not use solvents such as benzine, thinner, commercially available cleaners, or antistatic spray intended for analogue records.
Cleaning the disc lens
After prolonged use, dirt or dust may accumulate at the disc lens.To ensure good playback quality, clean the disc lens with Philips CD
Lens Cleaner or any commercially available cleaner. Follow the instructions supplied with the cleaner.
Selecting Radio Station
1 Press TUNER to select Tuner mode.
The red TUNER light will appear on the front of the System.
The current radio frequency (station number) will appear on
the display panel.
2
Press AUDIO/BAND to select FM or MW.
3 Press s or B to select a preset radio station.
You also can select a preset radio station by pressing the
Number buttons.
The preset number will appear in the display panel to the left
of the station’s frequency.When choosing preset stations 10
and above, enter both digits within two seconds to ensure you
enter the complete number.
4 Press SKIP/P+ i or SKIP/P– j to change the radio fre-
quency by one-tenth.
• For example, to go from 100.1 to 100.2, press SKIP/P+ i.
Use these buttons to fine-tune the station you want.
Or, to search for the next available station, press and hold
SKIP/P+ i or SKIP/P– j for one second, then release.
SEARCH will appear on the display panel when you release
the button.When a station with sufficient signal strength is
found, the station will be tuned and searching will stop.You
can press and hold SKIP/P– j to search backward to the
last available station.
Note:
- If the sound is distorted during MW reception, press
o / p on the remote to reduce the noise.This is effective
only for the current MW station.This does not work for
every situation.There may be interference from other
electrical appliances or weak MW signals.
Preset Radio Stations
Automatic Presetting
You can store up to 40 preset radio stations automatically by
following these steps.
1 Press TUNER to select Tuner mode.The red TUNER light will
appear on the front of the System.
2 Press and hold SYSTEM MENU/PROG until AUTO appears on
the System’s display panel, then release SYSTEM MENU/PROG.
The System will start scanning for stations. FM stations will be
set first, followed by MW stations.The System will store the
first 40 stations found.When programming is finished, the last
preset station will be tuned.
3 Or, you can press SYSTEM MENU/PROG or STOP C to stop
presetting stations.The radio stations scanned so far will be
stored.The last stored station will be tuned.
Note:
- If a radio station has been stored in one of the presets, it
will not be stored again under another preset number
during Automatic Presetting.
Manual Presetting
If Automatic Presetting does not memorize all the stations you
want, you can preset individual stations manually.
1 Press SKIP/P+ i or SKIP/P– j to select the station you
want to designate as a preset station.
2 Press SYSTEM MENU/PROG.The next available preset number
and the station’s frequency will blink in the display panel.To
store the station under a different preset number, press { or
B to choose a preset number.
If Prog ... FULL appears before the station’s frequency starts
blinking, there are already 40 presets. Press { or B to choose
a preset that you want to replace with the new station you are
presetting now.
3 Within 20 seconds, press SYSTEM MENU/PROG to store the
radio station under the designated preset number. (After 20
seconds, the Tuner will exit presetting mode. If you’ve made a
mistake, wait 20 seconds for the frequency and preset number
to stop flashing, then try again.)
Note:
- To erase a preset, press B or { to select the preset sta-
tion you want to delete.Then, press and hold STOP C on
the remote until PRESET ...DELETED appears on the
System’s display panel.The preset numbers of all other
radio stations with higher numbers will decrease by one.
Maintenance
E9017FD_EN.qx3 03.8.6 10:13 AM Page 22
22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

philips-mx5100vr

Suche zurücksetzen

  • Beim VHS Kassetten einlegen zeigs immer Error 2 an Eingereicht am 13-4-2023 12:25

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Philips MX5100VR wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Philips MX5100VR

Philips MX5100VR Bedienungsanleitung - Deutsch - 22 seiten

Philips MX5100VR Bedienungsanleitung - Englisch - 2 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info