Bedienungsanleitung Philips PPX 4935 Picopix (Seite 5 von 36) (Englisch)

639198

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Philips  PPX4935 5

1 General Safety Information

Do not make any changes or settings that are not

described in this user manual. Physical injury or

damage to the device or loss of data can result

from improper handling. Take note of all warning

and safety notes indicated.

Setting up the Device

The unit is for indoor use only. The device should

be placed securely on a stable, flat surface.

Position all cables in such a way that no one will

stumble on them, thus avoiding possible injuries to

persons or damage to the device itself.

Do not plug in the device in moist rooms. Never

touch the mains cable or the mains connection

with wet hands.

The device must have sufficient ventilation and

may not be covered. Do not put your device in

closed cabinets or boxes.

Do not place the machine on soft surfaces such as

tablecloth or carpets and do not cover the

ventilation slits. Otherwise the device could

overheat or catch fire.

Protect the device against direct sunlight, heat,

large temperature fluctuations and moisture. Do

not place the device in the vicinity of heaters or air

conditioners. Observe the information on

temperature and humidity in the technical data.

Do not allow liquids to enter into the device.

Switch off the device and disconnect it from the

mains supply if liquids or foreign substances end

up inside the device. Have the unit inspected by a

technical service department.

Always handle the unit with care. Avoid touching

the lens. Never place heavy or sharp objects on

the projector or the power cable.

If the projector gets too hot or emits smoke, shut it

down immediately and unplug the power cable.

Arrange for your device to be investigated by a

technical service centre. To prevent the spread of

fire, open flames should be kept away from the

device.

Under the following conditions a layer of moisture

can appear inside the device which can lead to

malfunctions:

 if the device is moved from a cold to a warm

area

 after a cold room is heated

 when this device is placed in a damp room.

Proceed as follows to avoid any moisture build-up:

1. Seal this device in a plastic bag before

moving it to another room, in order for it to

adapt to room conditions.

2. Wait one to two hours before you take the

device out of the plastic bag.

The device should not be used in a very dusty

environment. Dust particles and other foreign

objects may damage the unit.

Do not expose the device to extreme vibrations as

internal components my get damaged.

Do not allow children to handle the device without

supervision. The packing materials should be kept

out of the hands of children.

Automatic Temperature

Control

This device includes an automatic thermal

management controller. If the internal temperature

gets too hot, the fan speed will automatically

increase (noise increase), if the temperature still

continue to growth, the brightness of your product

will decrease and finally the current symbol will

appear.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips PPX 4935 Picopix Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips PPX 4935 Picopix

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info