Bedienungsanleitung Philips PPX1020 (Seite 5 von 56) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

486592

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

Overview · Dear Customer 5

1Overview

Dear Customer

Thank you for purchasing our Pocket Projector.

We hope you enjoy your device and its many functions!

General Safety Information

Introduction 2

Do not make any changes or settings that are not

described in this user manual. Physical injury or damage

to the device or loss of data can result from improper

handling. Take note of all warning and safety notes indi-

cated.

Setting Up the Device

Protect the device against direct sunlight

Protect the device against direct sunlight, heat, large

temperature fluctuations and moisture. Do not place

the device in the vicinity of heaters or air conditioners.

Observe the information on temperature and humidity

in the technical data.

In the event that the device becomes too hot, or if you see smoke coming from the device (USB)

In the event that the device becomes too hot, or if you

see smoke coming from the device, you must immedi-

ately disconnect the device from the USB socket. Have

your device examined by trained professionals at a tech-

nical service location. To prevent the spread of fire,

open flames should be kept away from the device.

Do not plug in the device in moist rooms.

Do not plug in the device in moist rooms. Never touch

the mains cable or the mains connection with wet

hands.

Moisture build-up

Under the following conditions, a layer of moisture can

appear inside the device which can lead to malfunctions:

· if the device is moved from a cold to a warm area;

· after a cold room is heated;

· when this device is placed in a damp room.

Proceed as follows to avoid any moisture build-up:

1 Seal this device in a plastic bag before moving it to

another room, in order for it to adapt to room con-

ditions.

2 Wait one to two hours before you take the device

out of the plastic bag.

The device should not be used in a very dusty environment.

The device should not be used in a very dusty environ-

ment. Dust particles and other foreign objects may

damage the unit.

Do not expose the device to extreme vibrations

Do not expose the device to extreme vibrations. It may

damage the internal components.

Do not allow children to handle the device without supervision.

Do not allow children to handle the device without

supervision. The packing materials should be kept out of

the hands of children.

Repairs

Do not make any repairs to the device yourself.

Improper maintenance can result in injuries or damage

to the device. Only have your device repaired by an

authorised service centre.

Do not remove the type label from your device; this

would void the warranty.

High Power LED

This device is equipped with an high power LED (Light

Emitting Diode), which emits very bright light. Do not

stare directly into the projector lens to avoid eyes

injury or irritations.

Top of the Device

‚ Focus setting

ƒ Mini USB connection

PicoPix P1 oben

Bottom of the Device

„ Tripod socket

… Fold-out base

PicoPix P1 unten

ppx1020_manual_02_en_253345797-a.book Seite 5 Freitag, 17. September 2010 12:54 12

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips PPX1020 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info