670586
6
Zoom out
Zoom in
Vorherige Seite
1/7
Nächste Seite
6
Installation instructions
Dynamic SoundField
V5.00/2012-06/visu’l/© Phonak AG/All rights reserved/page 6/7
inspiro version 2.2 – 2.3
When the battery symbol appears, press OK button and LEFT
SOFTKEY (C) simultaneously as shown below, then press OK (D).
a) Select “Soundfield” to access the pairing menu.
b) Select “Pairing”. inspiro will now guide you through the
pairing process. Follow the instructions provided.
C D
Note:
The key combination (C and D) should be pressed within 15 seconds
of the battery symbol appearing. After this interval, the inspiro
needs to be switched Off/On before repeating the key
combination (C and D)
1) Make sure inspiro is fully charged (see Dynamic SoundField User Guide). Switch on inspiro.
2) Follow the pairing procedure relevant to your inspiro’s software version:
inspiro version 3.0 and later
When the battery symbol appears, press ‘pairing’ soft key button.
inspiro will guide you through the pairing process. Please follow
the on-screen instructions.
How to find the inspiro software version?
Select “Help” and “About inspiro”
3) When you see three dots on the inspiro LCD, hold inspiro close to the loudspeaker (less than 1 meter/3 feet)
and switch on the DigiMaster.
4) DigiMaster 5000 loudspeaker
After a second or two, inspiro will inform you that the loudspeaker has been paired. The LED color of the DigiMaster will display
a constant blue light. This shows that the Dynamic SoundField system is ready for operation. Dynamic SoundField’s installation is complete.
5) DigiMaster 7000 loudspeaker
After a second or two, inspiro will inform you that the loudspeaker has been paired and will ask,
“Do you want to pair a second Dynamic SoundField?”
1) If NO, the LED color of the DigiMaster will now display a constant blue light. This blue light shows that the
Dynamic SoundField system is ready for operation. Dynamic SoundField’s installation is complete.
2) If YES, repeat the previous step for the second loudspeaker (DigiMaster 7000).
3) After succesfully pairing, the LED color of the second DigiMaster loudspeaker will display a constant blue light.
The Dynamic SoundField system is ready for operation. Dynamic SoundField’s installation is complete.
3. Pairing DigiMaster with inspiro
6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Phonak Dynamic SoundField wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Phonak Dynamic SoundField

Phonak Dynamic SoundField Installationsanweisung - Holländisch - 7 seiten

Phonak Dynamic SoundField Kurzanleitung - Alle Sprachen - 1 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info