Bedienungsanleitung Pioneer 506 xde (Seite 36 von 236) (Deutsch, Englisch, Französisch)

140416

Zoom out

Zoom in

Vorherige Seite

1/236

Nächste Seite

Basic Adjustment Settings

7 Press HOME MENU to exit the menu.

Using the 3DYC and I-P Mode

1 Press HOME MENU.

2 Select “Picture” ( / then ENTER).

3 Select “Pro Adjust” ( / then ENTER).

4 Select “Others” ( / then ENTER).

5 Select an item to be adjusted ( / then ENTER).

• You can select “3DYC” or “I-P Mode”.

6 Select the desired parameter ( / then ENTER).

7 Press HOME MENU to exit the menu.

NOTE

• For the 3DYC, the individual parameters are selectable only

when:

You have selected INPUT 1, 2, or 3 as the input source and

“Video” as the input signal type (page 55); or

You have selected INPUT 5 as the input source without a

S-Video cable in connection; or

You have selected the analog tuner.

• For the I-P Mode, the individual parameters are not

selectable for the following input signals:

480p, 720p@60Hz, 576p, 720p@50Hz, 1080p@24Hz

Sound adjustments

You can adjust the sound quality to your preference with the

following settings.

Adjust the sound to your preference for the chosen AV

Selection option. See page 33.

1 Press HOME MENU.

2 Select “Sound” ( / then ENTER).

3 Select an item to be adjusted ( / ).

4 Select the desired level ( / ).

5 Press HOME MENU to exit the menu.

NOTE

• To restore the factory defaults for all items, press / to

select “Reset” in step 3, and then press ENTER. A

confirmation screen appears. Press / to select “Yes”, and

then press ENTER.

• You cannot adjust the sound quality for listening with

phones.

• If you perform sound adjustments with phones connected,

the new settings will become effective for sound from the

speakers after the phones are disconnected.

FOCUS

This shifts the sound coming direction (sound images) upward

and produces clear sound contours.

1 Press HOME MENU.

2 Select “Sound” ( / then ENTER).

3 Select “FOCUS” ( / ).

4 Select the desired parameter ( / ).

ACL

Performs such compensation that results in the optimum contrast

characteristics for images.

Selections Off Deactivates the ACL.

On Activates the ACL.

Gamma

Adjusts the gamma characteristics (image gradation characteristics).

Selections 1 Selects gamma characteristics 1.

2 Selects gamma characteristics 2.

3 Selects gamma characteristics 3.

3DYC

Optimises characteristics for separating brightness signals and colour

signals. This works for both video and still images.

Selections Off Deactivates the 3DYC.

High Enhanced 3DYC

Mid Standard 3DYC

Low Moderate 3DYC

I-P Mode

Perform optimum conversion from interlace signals to progressive

signals. This works for both video and still images.

Selections 1 Optimum for video images

2 Standard setting

3 Optimum for still images

Item

button button

Treble For weaker treble For stronger treble

Bass For weaker bass For stronger bass

Balance Decreases audio from the

right speaker.

Decreases audio from the

left speaker.

Bass

Balance

Treble

Reset

FOCUS

Front Surround

Headphone Output

Sub Volume

Off

Main

Sound STANDARD

Reset

FOCUS

Front Surround

Off

PDP506XDE.book Page 36 Friday, June 17, 2005 3:08 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer 506 xde Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer 506 xde

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info