Bedienungsanleitung Pioneer 506 xde (Seite 50 von 236) (Deutsch, Englisch, Französisch)

140416

Zoom out

Zoom in

Vorherige Seite

1/236

Nächste Seite

Using the Electronic Programme Guide (EPG)(for DTV only)

Presetting TV programmes using the

EPG

Using the EPG, you can easily preset digital TV programmes for

watching (auto channel select) and recording later.

You must also adjust your recording equipment settings to

record the programme. Refer to the operation manual provided

with your recording equipment.

Using auto channel select and standby

recording

With the power to the system left on, this function

automatically selects a preset TV programme when its on-air

time comes. That way you will not miss the start of an

important TV programme because you were enjoying another

TV programme.

Even if the system is in the standby mode when the preset TV

programme’s on-air time comes, the Media Receiver wakes up

and outputs AV signals for recording.

1 Press EPG.

• The EPG screen appears.

2 Select a programme to be preset ( / , / then ENTER).

• Select a programme not yet started.

• A setup menu appears.

• Select a programme currently on-air (then ENTER): The

EPG screen closes and a channel is tuned in.

• Select a programme currently on-air (then GREEN): The

programme can be set for recording/watching the next

time (or week) it is shown.

• Select a programme not yet started (then ENTER or

GREEN): The programme can be set for recording/

watching.

3 Select “Yes” in a confirmation dialogue box ( / then

ENTER).

• The Programme Timer screen with a list of other preset

programmes information appears.

• You can modify the presettings here ( / , / then

ENTER).

• You can register the presettings here ( or ENTER).

4 Press RETURN to return to the EPG screen.

• The EPG screen updates with the new presettings.

• A red clock icon appears for the preset programme.

• A yellow triangle icon appears for overlapped

presettings.

5 Press EPG to exit the EPG screen.

With the system switched on, a channel switch alarm message

appears approximately 60 seconds before execution and the

channel is switched a short time before the start of the

programme.

NOTE

• Auto channel select is not executed when the system is in

the standby mode.

• Even in the standby mode, preset programmes can be

recorded as only the Media Receiver alone wakes up and

outputs AV signals when the preset time comes.

• Finish presetting operations three minutes before the start of

the programme.

• For priorities about overlapped presettings, see “Priority

rules for overlapped presettings” on page 51.

• The TIMER indicator on the front of the Media Receiver lights

up in orange when a programme is preset for recording/

watching.

• Recording may fail because of watching restrictions

imposed by the CA module.

Every Day

Every Sun

Mon-Fri

Sat, Sun

Mon.05.Jan

No.

Programme Timer

Date

14:00-15:00

12:00-13:00

Time

007

***************

007

***************

007

***************

007

***************

001

************

Channel Info

Wed.24.Nov 12:34

PDP506XDE.book Page 50 Friday, June 17, 2005 3:08 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer 506 xde Seite 50

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer 506 xde

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info