Bedienungsanleitung Pioneer BDP-450 (Seite 56 von 60) (Englisch)

491874

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

Others

A message other than

“Networks is OK.” is

displayed when Connection

Test is performed.

Is “Network is FAILED.”

displayed?

• Check that this player and the Ethernet hub (or router with a hub

functionality) are properly connected.

• If the IP address is obtained using the DHCP server function, check

the setting is correct at the Information (page 42). For details on the

DHCP server function, see the operating instructions for the Ethernet

hub (or router with a hub functionality).

• Set the IP address manually.

• Check the operation and settings of the DHCP server function of the

Ethernet hub (or router with hub functionality). For details on the DHCP

server function, see the operating instructions for the Ethernet hub (or

router with a hub functionality).

• If this player has been set manually, reset the IP address of this player

or other components.

Is the Ethernet hub (or router

with a hub functionality)

operating properly?

• Check the settings and operation the Ethernet hub (or router with a

hub functionality). For details, see the operating instructions for the

Ethernet hub.

• Reboot the Ethernet hub (or router with a hub functionality).

Problem Check Remedy

Power does not turn on. Is the power cord properly

connected?

• Plug the power cord securely into the power outlet (page 23).

• Unplug the power cord, wait several seconds, then plug the power

cord back in.

The player’s power turns off

automatically.

Is Auto Power Off set to 10

min/20 min/30 min?

If Auto Power Off is set to 10 min/20 min/30 min, the player’s power

automatically turns off if no operation is performed for the set amount

of time (page 44).

The player’s power turns on

automatically.

Is Control set to On?The player’s power may turn on together with the power of the TV

connected to the HDMI OUT terminal. If you do not want the player’s

power to turn on when the TV’s power is turned on, set Control to Off

(page 42).

This unit cannot be operated. • Use within the specified usage tempe

rature range (page 59)

• If the power cannot be turned off (to standby), reset the unit. On the

BDP-450, press and hold  STANDBY/ON on the main unit’s front

panel for over 5 seconds. On the BDP-150, use a thin rod to press the

reset button on the main unit’s front panel. The unit restarts and can

now be operated.

The player cannot be

operated with the remote

control.

Are you operating the remote

control from a point too far

away from the player?

Operate from within 7 m of the remote control sensor.

Are the batteries dead? Replace the batteries (page 5).

Input of the connected TV

and AV system switches

automatically.

Is Control set to On?The input of the TV and AV system (AV receiver or amplifier, etc.)

connected to the HDMI OUT terminal may automatically switch to the

player when playback starts on the player or the menu screen (Home

Media Gallery, etc.) is displayed. If you do not want the inputs of the

connected TV and AV system (AV receiver or amplifier, etc.) to switch

automatically, set Control to Off (page 42).

Settings I have made have

been cleared.

• Have you disconnected the

power cord while the player’s

power was on?

• Has there been a power

failure?

Always press  ST

ANDBY/ON on the playe

r’s front panel or

 STANDBY/ON on the remote control and check that POWER OFF

has turned off from the player’s front panel display before

disconnecting the power cord. Be particularly careful when the power

cord is connected to the AC outlet on another device because the

player turns off in conjunction with the device.

Problem Check Remedy

BDP-450_VXE8_IBD_EN.book 56 ページ２０１２年６月２２日　金曜日　午後２時１１分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer BDP-450 Seite 56

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer BDP-450

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info