Bedienungsanleitung Pioneer DEH-X6600DAB (Seite 5 von 148) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

528318

Zoom out

Zoom in

Vorherige Seite

1/148

Nächste Seite

Black plate (5,1)

! This function is disabled while pausing. For

more details about pausing, refer to Pausing

on page 4.

! Depending on the band, text information can

be changed.

! Text information items that can be changed

depend on the area.

Listening to a recent broadcast

(time shift)

You can navigate through recent broadcasts

from the selected Service Component.

1 Press

/DIMMER to switch to time shift

mode.

Press again to resume the live broadcast.

2 Press c or d to adjust the playback point.

! Press c to skip back one minute.

! Press d to skip forward one minute.

This unit stores recent broadcasts to memory

automatically. The memory capacity of this unit

will vary depending on the bit rate of the Service

Component used. The approximate memory ca-

pacity is five minutes for 192kbps.

Stored selections that are older than what can

be stored in the memory will not be available.

Selecting a Service Component

You can select a Service Component from the

following service list.

1 Press

(list) to switch to the service list

mode.

2 Turn M.C. to change the service list and

press to select.

Once selected, the following Service Component

functions can be adjusted.

SERVICE (service label)

You can select a Service Component from the list

of all components.

1 Turn M.C. to select a Service Component.

2 Press M.C. to receive a broadcast from the se-

lected Service Component.

Using alphabet search

1 Press

(list).

2 Turn M.C. to select a letter.

3 Press M.C. to display the alphabetical list.

4 Turn M.C. to select a Service Component.

5 Press M.C. to receive a broadcast from the se-

lected Service Component.

PROGRAM TYPE (PTY label)

You can select a Service Component from PTY in-

formation.

1 Turn M.C. to scroll to the desired PTY informa-

tion and press it to select.

NEWS/INFO—POPULAR—CLASSICS—

OTHERS

2 Turn M.C. to select a Service Component.

3 Press M.C. to receive a broadcast from the se-

lected Service Component.

ENSEMBLE (ensemble label)

You can select a Service Component from the rele-

vant ensemble.

1 Turn M.C. to scroll to the desired ensemble

and press it to select.

2 Turn M.C. to select a Service Component.

3 Press M.C. to receive a broadcast from the se-

lected Service Component.

Updating service list information

You can receive updates to the service list.

% Press and hold down

(list).

To cancel, press

(list) again.

Function settings

1 Press M.C. to display the main menu.

2 Turn M.C. to change the menu option

and press to select FUNCTION.

Once selected, the function below can be ad-

justed.

S.FOLLOW (alternative Service Component

search)

If the tuner cannot get good reception, the unit

will automatically search for another ensemble

that supports the same Service Component. If no

alternative Service Component can be found or re-

ception remains poor, this function will automati-

cally switch to an identical FM broadcast.

1 Press M.C. to turn alternative Service Compo-

nent search on or off.

Radio

Basic operations

Selecting a band

1 Press BAND/

until the desired band (FM1,

FM2,FM3 for FM or MW/LW) is displayed.

Switching preset stations

1 Press c or d.

! Select PCH (preset channel) under SEEK to

use this function.

Manual tuning (step by step)

1 Press c or d.

! Select MAN (manual tuning) under SEEK to

use this function.

Seeking

1 Press and hold c or d, and then release.

You can cancel seek tuning by briefly pressing

c or d.

While pressing and holding c or d, you can

skip stations. Seek tuning starts as soon as

you release c or d.

Notes

! For details about SEEK, refer to SEEK (left/

right key setting) on page 6.

! This unit’s AF (alternative frequencies

search) function can be turned on and off.

AF should be off for normal tuning operation

(refer to AF (alternative frequencies search)

on page 6).

Storing and recalling stations

for each band

Using preset tuning buttons

1 To store: Press and hold down one of the

preset tuning buttons (1/

to 6/ ) until

the number stops flashing.

2 To recall: Press one of the preset tuning

buttons (1/

to 6/ ).

Switching the display

Selecting the desired text information

1 Press DISP to cycle between the following:

! FREQUENCY (program service name or

frequency)

! BRDCST INFO (program service name/PTY

information)

! CLOCK (source name and clock)

English

Using this unit

Section

Using this unit

<QRD3198-B>5

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer DEH-X6600DAB Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info