Bedienungsanleitung Pioneer HTP-071 (Seite 5 von 32) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

491967

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

English

Français

Italiano

Español

Nederlands

Deutsch

Basic playback

Here are the basic instructions for playing a source (such as a Blu-ray Disc) with your home theater system.

Switch on your system components and receiver.

Start by switching on the playback component (for example a Blu-ray Disc player), your TV, then the receiver (press

RECEIVER

Switch the TV input to the input that connects this receiver.

For example, if you connected this receiver to the

VIDEO

jacks on your TV, make sure that the

VIDEO

input is now

selected.

Press input function buttons to select the input function you want to play.

• The input of the receiver will switch over, and you will be able to operate other components using the remote

control.

• The input source can also be selected by using

INPUT SELECT

buttons on the remote control, or by using

the front panel INPUT SELECTOR dial. In this case, the remote control won’t switch operational modes.

• Press SIGNAL SEL to select the audio input signal corresponding to the source component (HDMI, digital or

analog).

Press AUTO/DIRECT to select ’AUTO SURROUND’ and start playback of the source.

If you’re playing a Dolby Digital or DTS surround sound Blu-ray/DVD disc, with a digital audio connection, you

should hear surround sound. If you’re playing a stereo source or if the connection is an analog audio connection,

you will only hear sound from the front left/right speakers in the default listening mode.

RECEIVER

SOURCESLEEP

CONTROL

RECEIVER

RECEIVER DTV/TV

PHASE

SIGNAL SELS.RETRIEVER

VOL

DIMMER

INPUT

MIDNIGHT

HDD

SPEAKERS

LEV

SB CH

TEST TONE

DVD

CH SELECT

VCR

SHIFT

DISP

456

789

CLR

ENTER

INPUT SELECT

BD DVD TV

DVR/BDR

CD-R

ADAPTER

TUNER

PORTABLE

BD MENU

ADV SURR

AUTO/

DIRECT

ALC/

STANDARD

STEREO

MUTE

RETURN

AUDIO

PARAMETER

TUNER EDIT

TOOLS

BAND

HOME

SETUP

PTY SEARCH

TOP

ENTER

TRE

BASS

MASTER

VOLUME

Listening in Standard surround sound

This receiver provide basic surround sound for stereo and multichannel sources.



While listening to a source, press ALC/STANDARD repeatedly to select a listening mode.

Listening in Advanced surround sound

The Advanced surround effects can be used for a variety of additional surround sound effects.



While listening to a source, press ADV SURR repeatedly to select a listening mode.

Use MASTER VOLUME +/– to adjust the volume level.

• Sound can be switched off by pressing MUTE button.

Enjoy a variety of sounds.



Press S.RETRIEVER to switch the Sound Retriever feature ON or OFF.

• When audio data is removed during the compression process, sound quality often suffers from an uneven

sound image. The Sound Retriever feature employs new DSP technology that helps bring CD quality sound

back to compressed 2-channel audio by restoring sound pressure and smoothing jagged artifacts left over after

compression.

Other remote control functions

• The input of the receiver will switch over, and you will be able to operate other components using the remote

control. To operate the receiver, first press

RECEIVER

(

), then press the appropriate button to operate.



Use the "A" buttons to adjust the settings of this receiver and operate other devices.



Use the "B" buttons to operate TV. Operations are still possible even after pressing the

RECEIVER

button.

Listening to the radio

Press TUNER to select the tuner.

If necessary, press

BAND

to change the band (FM or AM).

Press

TUNE



to tune to a station.

• Press and hold

TUNE



for about a second. The receiver will start searching for the next station.

If you’re listening to an FM station but the reception is weak, press

BAND

to select

FM MONO

and set the receiver

to the mono reception mode.

Saving station presets

If you often listen to a particular radio station, it’s convenient to have the receiver store the frequency for easy recall

whenever you want to listen to that station.

Press TUNER EDIT while receiving a signal from the station you want to store.

The display shows

PRESET

, then a blinking

MEM

and station preset.

Press PRESET

l

(or number buttons) to select the station preset you want

then press ENTER.

The preset number stop blinking and the receiver stores the station.

Listening to station presets

You will need to have some presets stored to do this.



Press PRESET

l

(or number buttons) to select the station preset you want.

• The following buttons are not used with this receiver:

– ADAPTER, PORTABLE

Canceling the Auto Power Down

When this receiver is not used over a period of

several hours, it will power down automatically. The

automatic power-off timer is set to six hours under

factory settings, and the timing can be changed or

the power-off function switched off altogether.

“The Auto Power Down menu”

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer HTP-071 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer HTP-071

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info