Bedienungsanleitung Pioneer HTP-SL050 (Seite 5 von 80) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

531640

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

English

Connection

Connecting the cord

1 Attach one end of the supplied speaker cord to the rear

of the each speaker.

• Connect the wire with the colored marker to the red (+)

terminal; the plain wire to the black (–) terminal. Press down

the spring-loaded tab and insert the wire, as shown below.

Release the tab to secure the wire.

2 Connect the other ends of the cords to the amp’s speaker

output terminals (for more details, refer to your amp

instruction manual).

• These speaker terminals carry HAZARDOUS LIVE voltage. To

prevent the risk of electric shock when connecting or

disconnecting the speaker cords, disconnect the power cord

before touching any uninsulated parts.

• After connecting the plugs, pull lightly on the cords to make

sure that the ends of the cords are securely connected to the

terminals. Poor connections can create noise and

interruptions in the sound.

• If the cords’ wires happen to be pushed out of the terminals,

allowing the wires to come into contact with each other, it

places an excessive additional load on the receiver. This may

cause the amp to stop functioning, and may even damage the

receiver.

• When using a set of speakers connected to an receiver, you

won’t be able to obtain the normal stereo effect if the polarity

(+, –) of one of the speakers (left or right) is reversed.

Operation (S-SL100-LR/S-SL100CR)

Since the S-SL100-LR/S-SL100CR are designed as compact

satellite speakers, it is recommended that they be used in

combination with a sub-woofer to provide full base sound. In this

case, set your amplifier (receiver) speaker setting to “small” and

the crossover frequency to 200 Hz.

Specifications

S-SL100-LR/S-SL100CR

Enclosure. . . . . . . . Closed-box bookshelf type (magnetically shielded)

Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . 10 cm x 7 cm, full range

Impedance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Ω

Frequency range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 Hz to 20 kHz

Sensitivity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81 dB

Maximum input power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 W

Exterior dimensions . . . . . . 86.5 (W) mm x 206 (H) mm x 85.5 (D) mm

Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.7 kg

Supplied accessories (S-SL100-LR)

Speaker cord (4 m) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Non-skid pads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Warranty card (European model only) . . . . . . . . . . . . . . . . . . . . . . . . . 1

Operating instructions (this document)

Supplied accessories (S-SL100CR)

Speaker cord (4 m) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Speaker cord (10 m) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Non-skid pads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Warranty card (European model only) . . . . . . . . . . . . . . . . . . . . . . . . . 1

Operating instructions (this document)

S-SLW500

Enclosure. . . . . . . . . . . . . . . . . . . . . . . . . . . . Bass-reflex bookshelf type

Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 cm cone

Impedance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Ω

Frequency range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Hz to 2.0 kHz

Sensitivity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78 dB

Maximum input power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 W

Exterior dimensions

Horizontal orientation. . . . 435 (W) mm x 121 (H) mm x 360 (D) mm

Vertical orientation . . . . .108.5 (W) mm x 435 (H) mm x 360 (D) mm

Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.5 kg

Supplied accessories

Speaker cord (3 m) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Non-skid pads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Seal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Warranty card (European model only) . . . . . . . . . . . . . . . . . . . . . . . . . 1

• The S-SL100-LR is shipped with two speaker systems per

package.

• The S-SL100CR is shipped with three speaker systems per

package.

• Specifications and design subject to possible modification

without notice, due to improvements.

is a trademark placed on a product with Pioneer’s Phase

Control technology. This technology enables high-grade sound

reproduction through each component by improving overall

phase matching.

Red (+)

Black (–)

Red colored marker

S-SL100-LR_S-SL100CR_En.fm 5 ページ２０１１年４月１２日　火曜日　午前１１時３１分

Pioneer HTP-SL050 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info